High pressure usually indicates a dirty pool filter, time to backwash or pull out the filter cartridge for cleaning. Be careful with high filter pressure, as filter tanks can rupture with deadly force.
Also know, how do I lower the PSI on my Hayward pool pump?
Consequently, can a pool filter explode?
Pool filters do explode and can cause damage to property and serious injury or even death. Since 1982, the Consumer Product Safety Commission has recorded at least 23 incidents of pool filter explosions.
What happens if pool filter pressure gets too high?
A pool filter requires a certain amount of pressure inside the tank to function. If that pressure gets too low or too high, the filter won’t work properly, and it can damage other equipment.
How do I lower the pressure on my pool pump?
You can reduce the pressure in your swimming pool pump by cleaning out its filters.
- Shut Down the Pump. Turn off your pool pump and filter. …
- Remove the Cover. …
- Take Out the Pump Basket. …
- Rinse the Pump Basket. …
- Remove Any Debris From the Impeller Port. …
- Replace the Cover. …
- Examine the Air Relief Valve. …
- Monitor the Water Pressure.
How many psi should a pool pump run at?
Normal pressure for most pools is between 10 and 25 PSI (70-170 kPa). The pressure for filtration systems varies depending on the type of filter, the size of the lines, the pump and other pool equipment.
How many psi should my pool filter run at?
Your filter may be clean and normal at 9-10 psi, but your neighbor’s filter gauge could run higher, and be clean at 15-16 psi. Some systems with very low resistance can run very low pressures, barely registering, while other filter systems can run quite high, pushing 30 psi when the filter becomes dirty.
Does air damage pool pump?
When air gets trapped in your pump, the motor overworks itself and runs the risk of running hot. Solution: Check for leaks around the pump lid seal (O-ring), pump drain plugs, valves, and filter bands.