My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
Similarly, why can’t you use an extension cord with a dolphin pool cleaner?
Do not use an extension cord. In a wet deck environment the risk of stray voltage while small is signicant.
Correspondingly, does the dolphin Nautilus climb walls?
It does try to climb the walls, as it goes vertical, but just cannot get off the floor. The brushes just spin, then stop and it backs up. It does makes it onto the first step, but that’s it. Thanks for the help.
Why does my pool cleaner hose get tangled?
Excess hose will cause the cleaner to twist and tangle during operation, measure the hose to ensure that it is adjusted to the proper length for the pool size. You also need to make sure that the feed hose is floating. Any part of the hose that is waterlogged should be replaced.
How long is Maytronics warranty?
Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years. To prove how serious we are about delivering the best-in-class high performance robot, the Dolphin Premier is backed by the very best warranty in the industry.
How do I stop my pool cleaner from climbing walls?
How do you troubleshoot a dolphin pool cleaner?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Why does my pool vacuum keep getting stuck?
If the suction is too strong, pushing the cleaner with a long pole virtually guarantees it will get stuck. Pulling the cleaner with a long pole isn’t as problematic, but it is still challenging. You just don’t have the control you have with a short pole.
How do I reset my dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.