Secondly, can I run my pool pump every other day?
You can run your pump at any time of the day but if you want to save money, its smart to run it during non-peak hours. During peak hours electricity companies charge consumers a higher rate due to increased demand.
Thereof, how do I set the time on my IntelliFlo pump?
How to Set the Date/Time on the Pentair Intelliflo
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to cycle to “Settings”
- Press “Select”
- Cycle to “Date/Time”
- Press Select.
- You will see the factory default Date, press “Select” again to edit.
How do I reset my Pentair Intelliflo variable speed pump?
To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.
How do you adjust a variable speed Pentair pump?
How do you convert GPM to RPM?
Output Calculation
The ratio is 1 gallon for every 10 RPM, or 1:10. Now if you measure the pump’s output and find it has pumped 2.3 gallons in one minute, you can estimate its RPM is 2,300.
How long should I run my variable speed pool pump?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.
How many hours a day should I run my pool pump?
How do you prime a Pentair pool pump?
How To Prime Your Pentair Pool Pump
- Turn off power to pump (switch and breaker)
- Using black 3 way valve, turn off Skimmer (main drain on only)
- Remove pump lid.
- Fill pump with water all the way to top.
- Put pump lid back on.
- Turn on Pump.
How long should I run my Pentair IntelliFlo pump?
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool’s size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool’s turnover rate is.
What is thermal mode on pool pump?
This feature allows you to set a speed (450- 3450 RPM) or flow (20-140 GPM) that runs when the IntelliFlo® VSF Variable Speed and Flow Pump goes into Thermal Mode. The temperature level that you wish Thermal Mode to start can also be set. IMPORTANT: This feature is for protection of the pump.
What RPM should I run my Pentair pool pump?
Generally, I run my equipment at 1700 RPMs for 10 hours. I run this with the saltwater generator set at 50% for 10 hours. In my case, 1700 RPM’s is the minimum I can do to reliably activate the saltwater generator and filter the pool.
What do you do when the power goes out and your pool freezes?
How do I reset my Pentair Intelliflo pump password?
Make sure the pump has power, green LED is on. Make sure the pump is not running. Press and hold all of the four Speed buttons simultaneously for four (or more) seconds. Power off the pump, wait a few seconds, power it back on.
How do I reset my Pentair pool timer?
How to Set the Date/Time on the Pentair Intelliflo
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to cycle to “Settings”
- Press “Select”
- Cycle to “Date/Time”
- Press Select.
- You will see the factory default Date, press “Select” again to edit.
What is egg timer on pool pump?
The Egg Timer count down feature allows you to define the run time for different circuits. For example, whenever. you manually switch your spa on, you would like it to automatically turn off in two hours.
How do I program Intelliflo VF?
How do I reset my Pentair Intelliflo pump after a power outage?
How to “restart” your pool once power is restored
- Remove the pool cover and check for debris. …
- Close any drain plugs or valves you may have opened during the power outage.
- Turn the breakers back on and prime the pool pump by adding water to the pot, replace the lid and turn the pool pump on.
How do you adjust a variable speed pool pump?
Why does my Intelliflo pump keep shutting off?
It could be a bad drive, over voltage, under voltage, drive over heating, ect. You could eliminate it being a control problem by unplugging the control cable on the motor, and manually running it. If it does not do it anymore then it is a control issue.
How many hours a day should I run my saltwater pool pump?
The pool pump in a saltwater pool should be run 8 to 12 hours per day on average. In saltwater pools, the pump needs to be on for two reasons. The first is to filter the water. The pump should complete at least one turnover of the pool water to filter it properly.
How do I keep my pool pump from freezing during a power outage?
Install a Freeze Control Timer: A freeze control timer can protect your inground swimming pool and spa equipment as well as pipes. Just set the temperature with the adjustable thermostat and the freeze control timer turns the pump and heater on when the weather drops.