What is the difference between sp2610x15 and w3sp2610x15? Answer: This is the same part. The “W3” that precedes the SP2610X15 in some products represents an online retailer part number.
Moreover, where do I find the model number on my pool pump?
The first place you want to check is typically the easiest- the strainer lid. The strainer lid on your pump basket is located on the wet end of your pump or, on the opposite side of your motor. Typically, pump manufacturers will stamp their part number on one of the sides of the lid or somewhere along the handle.
In this manner, can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
How do I identify my Hayward pool pump?
Luckily, most motor labels come with two searchable model numbers. Hayward labels (pictured) normally have a layout of the Motor Manufacturer model number listed at the upper left and Hayward’s proprietary motor model number normally listed at the bottom left.
How do I know what pool pump I have?
How to identify your Pool Motor without the label
- Tools you may need: 1. …
- The easiest way to determine your pump model is by finding the part number on the strainer lid. …
- If the lid is not unique and is a universal part for a manufacturer’s entire line of pumps then you will have to do more digging.
What causes a pool pump to burn out?
A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.
How do I know if my pool pump motor is bad?
Your pump could be leaking water, or the bearings might need to be replaced instead of the entire motor. Screeching is also a sign that your motor bearings need to be replaced. These loud, often painful sounds could also be a sign of rust or oxidation, making it more difficult for the bearings to do their job.