How does automatic pool water leveler work?

by

The leveler system has a floating mechanism that floats around your pool monitoring the water levels. Once the leveler detects that the water levels are getting too low for optimal usage, water is automatically added to your pool until it reaches a safe level again.

>> Click to read more <<

Herein, how much does it cost to add an automatic pool filler?

Autofill with anti-syphon valve runs about $150 retail plus installation labor. This might run another $150 depending on the length of the pipe run.

One may also ask, how do I set my pool to auto fill? Shut off the valve to the water supply line and fully drain the supply pipe or blow out with air. Pour a quart of non-toxic pool antifreeze into the autofill cylinder, or fill a clean quart bottle 1/2 full of antifreeze and place inside the autofill chamber, to protect the cylinder from ice expansion.

Also question is, what is the best pool leveler?

The 8 Best Automatic Pool Water Levelers — Reviews 2022

  1. Fill-O-MaticAutomatic Pool Water Leveler — Best Overall. …
  2. Control Devices RM153-20BK Water Leveler — Best Value. …
  3. Staypoollizer Nxgen Automatic Pool Water Leveler — Premium Choice. …
  4. Airlie Pool Water Leveler. …
  5. Rola-Chem Sentry Automatic Pool Water Leveler.

Do pools have autofill?

A popular upgrade for many Valley pools is an autofill, or water leveler as it’s sometimes called.. An autofill works by keeping track of the pool level and filling it as it becomes necessary.

7 Related Question Answers Found

How do I control the water level in my pool?

How to Lower Your Pool Water Level

  1. Start with your pump OFF.
  2. Open the two-way valve if there is one.
  3. Move the multiport valve to “WASTE”.
  4. Turn the pump ON and run until you reach the desired water level.
  5. Turn the pump OFF.
  6. Move the multiport valve back to “FILTER”
  7. Close the two-way valve if there is one.

How full should my inground pool be?

Pool owners often wonder what the optimal water level is for their pool. The pool water level is best measured at the skimmer assembly. The water level should be about one-third of the distance below the top of the skimmer.

What may cause the pool water level to drop?

Typically, pools lose water for one of two reasons: Evaporation or a leak. Evaporation naturally occurs in any body of water, but it may increase under certain conditions, such as hot, humid weather. Leaks, however, indicate a bigger problem that a professional may need to address.

Can you add an auto fill to an existing pool?

Autofill products are available for new construction and existing in ground pools.

Is a pool Auto Fill worth it?

Autofill is useful because if the pool level becomes too low, the skimmer will begin to suck air, and the pump motor for the pool filter could potentially burn up. Intense heat can evaporate the pool water level quickly, and it’s not hard to forget the pool needs to be filled.

What happens if pool water is too high?

If the water level is too high the debris floating next to the opening may pass by without being pulled into the skimmer. However if the water level is too low it may cause the skimmer to suck air into the system. If this happens you may run the risk of burning up your pool pumps motor.

What do I do if my pool is too full?

Disconnect the electrical and gas lines to your pool.

Standing water and electricity don’t mix. Make sure you turn off all power before the storm. Turn off your pool pump and the timer if you have one. Cover the pump and filter if you have a cover.

Leave a Comment