Can I leave my Dolphin pool cleaner in the pool?

Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.

>> Click to read more <<

Just so, are robot pool cleaners worth it?

Robotic cleaners are effective at cleaning large and small debris. They also circulate the pool water when your filter isn’t running and scrub your tile lines and pool wall. Powered by an electric motor and pump, robotic cleaners connect to a low-voltage transformer that plugs into one of your outdoor outlets.

Correspondingly, how long is Maytronics warranty? The Best Warranty in the Industry

Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years. To prove how serious we are about delivering the best-in-class high performance robot, the Dolphin Premier is backed by the very best warranty in the industry.

Accordingly, can I use extension cord with dolphin pool cleaner?

Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.

Can I leave my robotic pool cleaner in the pool?

You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work. It’ll have to work harder to cover the same ground.

How often should I run my dolphin pool cleaner?

Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.

Should I leave my pool robot in pool?

Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock. Over time, these chemicals break down parts in the cleaner and discolor the cleaner. The truth of the matter is – everyone leaves them in the pool, pretty much all the time.

How long should you run the Dolphin pool cleaner?

The Maytronics Dolphin Nautilus Robotic Cleaner is self-contained and fully automatic. Just drop it in your pool, turn it on and leave it for about 3 hours.

Why won’t my Dolphin pool cleaner climb walls?

My Dolphin Won’t Climb Walls / Gets Stuck

Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.

How long do Dolphin robotic pool cleaners last?

Generally, you can expect at least 5 years‘ service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for.

How do you troubleshoot a Dolphin pool cleaner?

Troubleshooting

  1. Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
  2. Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
  3. Turn the power supply off. …
  4. Unplug the power supply.

Leave a Comment