The Pool Cleaner is very simple to use. Simply put it into the pool and make sure that it is properly sitting on the floor of the pool. Turn it ON and let it get the job done.
Accordingly, how does the Dolphin pool vacuum work?
Dolphin is a robotic cleaner that circulates your pool, picking up debris and scrubbing away dirt and algae from the floor, walls, and waterline. Its smart technology maps out the most efficient cleaning route, navigates using PowerStream mobility, and can sense obstacles as it works.
Similarly one may ask, how do I turn on my dolphin pool cleaner?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
How do I reset my dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.
How do you test a Maytronics power supply?
Testing the power supply
- Connect the tester to the power supply.
- Switch the power supply on.
- If the tester light is on, proceed to test the cable.
- If the tester light is off, check the power socket and AC cable. If they are working, then replace the power supply and proceed to test the cable.
Can you use an extension cord with Dolphin Pool Cleaner?
Amazon.com: Customer Questions & Answers. Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
Why won’t my dolphin pool cleaner climb walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
How long is a dolphin pool cleaner cycle?
Each cleaning cycle is 2 hours. If it doesn’t finish cleaning in one cycle, you’ll have to manually restart it. All of that is done with a few buttons on the power supply. Like other cleaning robots with smart navigation, it will take a few cycles for it to map out the most efficient path for your pool.
Why is my dolphin pool cleaner not moving?
If you can identify an obstruction you can remove the object and then run your Dolphin again. If the Dolphin starts and continues to operate as per normal the the obstruction was the cause of the robotic pool cleaner not moving.
Can I leave my Dolphin pool cleaner in the pool?
This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
How often should I run my Dolphin Pool Cleaner?
I have owned a Dolphin Nautilus for about 4 years now. It cleans like a champ. My usual routine is to wait until the bottom of the pool is noticeably dirty before I run the robot. Generally, this may be once a week if the wind is not blowing too many leaves into the pool, twice a week if it is.
Why is my pool robot not working?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
Where is the impeller on my dolphin pool cleaner?
How do you troubleshoot a Dolphin pool cleaner?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
How long is Maytronics warranty?
The Best Warranty in the Industry
Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years. To prove how serious we are about delivering the best-in-class high performance robot, the Dolphin Premier is backed by the very best warranty in the industry.
Can you leave pool vacuum in pool overnight?
Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.