If the filter basket gets too full, debris spills over into the impeller housing. A single leaf can stop it from spinning freely. To prevent the motor from burning out the robot will shut down if the impeller isn’t spinning at the normal speed.
Moreover, how do you test a dolphin pool cleaner?
Beside above, how do you test a dolphin power supply?
How do you troubleshoot a Maytronics Dolphin?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Why is my pool cleaner not working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
Can I leave dolphin in pool?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
How do I reset my dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.
Why is my automatic pool vacuum not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
Is it better to run a pool pump at night or day?
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
How do you test a Maytronics power supply?
Testing the power supply
- Connect the tester to the power supply.
- Switch the power supply on.
- If the tester light is on, proceed to test the cable.
- If the tester light is off, check the power socket and AC cable. If they are working, then replace the power supply and proceed to test the cable.
How long is Maytronics warranty?
Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years. To prove how serious we are about delivering the best-in-class high performance robot, the Dolphin Premier is backed by the very best warranty in the industry.
Can I leave my robotic pool cleaner in the pool?
You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work. It’ll have to work harder to cover the same ground.
Why is the pool cleaner not working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
How long do Dolphin pool cleaners last?
You can expect the device to serve you for four or five years. It can even last up to eight years with the right upkeep. Although you can find cheaper models that do not offer the same lifespan but given the proper care, you can still expect them to run for at least three years.