The cleaner does not reach all areas of pool, stays in deep end. Hose length is incorrect. Adjust hose to required length using the measuring tape included with the cleaner.
Keeping this in view, why does my pool cleaner stay in one spot?
The stronger the water flow, the more likely it is to get stuck in one place. You need some suction though or the pool won’t get cleaned properly. The easiest solution is a flow keeper valve. A flowkeeper valve is a valve that regulates the flow of water through the hose going to the cleaner.
Secondly, can I use an extension cord with my dolphin pool cleaner?
Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
Can the Dolphin pool cleaner stay in the pool?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
How do you weight a Kreepy Krauly?
For pools 4′ deep or less, use 1 hose weight 4″ to 12″ from the cleaner. For pools of 4-7′ deep, use 2 weights, one 4″ to 12″ from the cleaner and one 6′ from the cleaner. For pools from 8′ to 12′ deep, use a third weight, placed 10 ft. from the swivel end of the cleaner.
Why does my pool cleaner stop moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
Why is my creepy getting stuck?
The Main Cause: A Coiling Hose
You have taken your hose out of the pool and stored it. It coiled. Over time the top layer of your pool water has slowly reset the memory of your hose.
Can you leave pool vacuum in pool overnight?
Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
Why does my pool vacuum go in circles?
Your first issue is to resolve the problem of the cleaner getting stuck or going in circles. This is most likely caused when pool cleaners are left in the pool 24/7. When the water is cold or cools off from a warm day, the plastic in the hose gets a memory and curls slightly.
Can I leave my robotic cleaner in the pool?
You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work. It’ll have to work harder to cover the same ground.