Automatic Pool Cover Maintenance Checklist
- Remove Water From the Cover.
- Remove Dirt and Debris From the Cover.
- Leave the Cover Open After Adding Chemicals.
- Examine/Clean the Pool Cover Tracks Regularly.
- Retract the Cover Once a Week.
- Keep the Housing Clean.
- Inspect the Fabric.
- Look for Obstructions.
Similarly, should I cover my pool every night?
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
Herein, should I leave my pool cover on during the day?
In dry and/or windy conditions, the evaporation rate of the pool increases. Therefore, it is generally beneficial to have a transparent or bubble cover on during daylight hours. In warm, humid conditions the evaporation rate decreases. In this case, it may be more beneficial to leave the cover off during the daytime.
What should I clean my pool cover with?
How do you lubricate an automatic pool cover?
How long does a pool cover motor last?
AUTOMATIC POOL COVER REPAIRS
A new Motor every 5-10 years is needed for electric motor systems; hydraulic motors can last 20 years if properly maintained. Engagement cams on the reel shaft may also be replaced if worn, although most cams will outlast several motors.
What is auto cover maintenance?
If the policyholder has paid the premium for the last 3 years, and if he discontinues paying premium after three years, the policyholder goes into Automatic Cover Maintenance.
Can you pressure wash a pool cover?
You should wash your solid pool cover every spring when you open up the pool for the season. If there is a great deal of dirt and debris on the cover, a power washer will work really well to remove it.
How do you clean the top of a pool cover?
How much water can an auto pool cover hold?
Automatic pool covers are rated to hold around 2,000 pounds, which is a lot of weight. However, snow, ice, and water can be very heavy, too, especially if it becomes concentrated in one area.
How do you clean an inground pool cover?
If the pool cover is wet, the easiest way to clean it is with a hose, spraying the debris to one end of the pool just as you do when using a leaf blower on a dry pool cover. If the pool cover has more than an inch of water on it, use a pool rake to collect the dirt, algae and other pieces of debris.
How do I clean the bottom of my pool cover?
Clean the cover with the soft brush with slow, circular motions to remove most of the mold. In many cases, a sponge simply won’t get off the worse of the mold build up. Once it’s loose, rinse the cover then use a sponge or cloth to thoroughly wipe down the cover. Rinse the cover thoroughly with water.
How do you clean an electric pool cover?
Keep it clean – The easiest way to clean the top of an automatic pool cover is to use a leaf blower to remove any leaves or debris. But it’s especially important to remove rainwater to avoid added stress on the cover itself.
Are auto pool covers worth it?
Automatic pool covers offer outstanding cost savings benefits. When closed over the swimming pool an automatic pool cover will save you on chemicals, water loss from evaporation, and energy costs by not having to constantly reheat the pool.
Can you walk on Coverstar pool cover?
Yes, your cover is built to hold the weight of several adults. However, we do not recommend that you walk on your cover.
How often do pool covers need to be replaced?
Most automatic safety pool covers on average last 4 to 6 years if you maintain them properly. We recommend that you buy a pool cover that comes with a pro-rated warranty. That way, you can always ask for a replacement if you notice issues within a few weeks of purchase.
How do you lubricate pool cover tracks?
Grease fittings are common on the rope reels and every year or two should be given a shot of fresh grease. Drive chains should also be lubed with a light oil. Tracks and sliders are not lubed, but should be checked for tightness and position.
How do you clean the leaves off an automatic pool cover?
How much weight can a Coverstar pool cover hold?
Our automatic safety covers are rated to hold up to 2000 pounds while the water is at operational levels.
Are automatic pool covers worth it?
Automatic pool covers offer outstanding cost savings benefits. When closed over the swimming pool an automatic pool cover will save you on chemicals, water loss from evaporation, and energy costs by not having to constantly reheat the pool.
How do you winterize a pool with an automatic cover?
Plug It Up
When you winterize a pool with an automatic cover, you lower the water level to somewhere between the bottom of the skimmer and normal water level and then blow out the lines and plug them up with inexpensive, little round rubber plugs.
How do you service a pool cover?
If the pool cover is wet, the easiest way to clean it is with a hose, spraying the debris to one end of the pool just as you do when using a leaf blower on a dry pool cover. If the pool cover has more than an inch of water on it, use a pool rake to collect the dirt, algae and other pieces of debris.
How long does a Coverstar pool cover last?
Similar to most other household items, automatic safety covers may wear and age with time. However, the average lifespan of a Coverstar cover is 6-8 years.