Question: What is the difference between sp2610x15 and w3sp2610x15? Answer: This is the same part.
Similarly one may ask, what size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.
Furthermore, is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
How do I know what Hayward filter I have?
Read the filter’s information tag.
All pool filters are labeled with an information tag on their tank. This tag includes the name of the manufacturer, model name, the various sizes of the filter in that line of models. The size of your specific unit should be marked or highlighted on this tag.
Is a 1.5 HP pool pump good?
With that in mind, a 0.5-horsepower pump with 40 feet of head resistance is suitable for small pools up to 11,000 gallons. A 1-horsepower pump with the same resistance will work for pools up to 26,000 gallons, while a 1.5-horsepower pump is suitable for large pools up to 30,000 gallons.
How do you read a Hayward serial number?
Hayward’s serial numbers for all products, with the exception of some cleaners, controls, heat pumps and electronic chlorinators, are 17 digits long and begin with the numbers ’21’. Often these numbers appear on product labels with spaces or parentheses.
How long should a 1.5 HP pool pump last?
How long do pool pumps last? Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.
What is the flow rate of a Hayward Super pump?
4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 2.5″ | 120 |
| 3″ | 180 |
| 4″ | 305 |
Can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
What type of pump is a Hayward Super pump?
How much does a Hayward pool pump cost?
What does a Hayward Super pump do?
Hayward in-ground pumps are self-priming centrifugal pumps. These pumps have a vacuum chamber, commonly known as a pump housing. The pump housing must be filled with water in order to create a vacuum, resulting in the pump drawing the water out of your pool or spa.
How do I identify my Hayward pool pump?
Where do I find the model number on my pool pump?
The first place you want to check is typically the easiest- the strainer lid. The strainer lid on your pump basket is located on the wet end of your pump or, on the opposite side of your motor. Typically, pump manufacturers will stamp their part number on one of the sides of the lid or somewhere along the handle.
Can you replace a 1.5 HP pool pump with a 2hp?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
What is the difference between a Hayward Super pump and Super pump 2?
Can I replace a 1.5 HP pool pump with a 1hp?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
How much does a 1.5 HP pool pump cost?
$1.36 per day x 365 days = $496 per year to Operate a 1-½ HP Variable Speed Pump. Cost to Operate 1-½ HP Single Speed Pool Pump $1,062 / yr Vs. Cost of Variable Speed Pump $496 / year.