MAX SPEED – The max allowed speed can be changed by pressing + or –. Once you have selected the max speed, press > to move on to minimum speed. Note: You may want to test the speeds by running the pump before programming the max and minimum speeds. Salt systems and heaters have minimum and max flow rates.
Beside this, how do you set the timer on a Hayward variable speed pool pump?
SELECT TIMER ONE SPEED – Press + or – to change the RPM Speed. Press > to move on to the Timer 1 start/stop time. Note: As mentioned in Step 9, you may want to test the speeds of the pump to see what speeds will be required for your pool system to function correctly.
Also know, how many hours should I run my variable speed pool pump?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
What should my pool pump be set on?
The lever should be on the ‘Filter’ setting most of the time. This is the setting that provides normal pool filtration by pushing the water through the filter media (sand, glass beads or D.E) that then traps any dirt and debris before the water is returned to the pool.
How do you control a variable speed pool pump?
Variable-speed pumps can run as low as 600 RPM. The lower RPMs significantly reduce motor noise, making the variable-speed pump a far quieter option than that old single-speed. Set your timer to turn the variable-speed pump on at a low setting overnight to turn over your pool water during non-peak power hours.
Is it better to run a pool pump at night or day?
It is best to run your pool’s pump during the day when the sun is out to reduce the risks of algae bloom and because there is generally more debris and contaminants that will enter your pool in the day.
How do you program a digital pool pump?
How do you unlock the configuration menu on a Hayward pump?
Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked’ (unit will beep). Press the (>) repeatedly, until ‘Chemistry Config. Wizard’ appears on the display.