It’s official, pHin is discontinuing its service. Acquired by Hayward in 2018, pHin offers a smart solution for swimming pools and hot tubs. Active for a few years, the pHin app is now completely shut down.
Consequently, how much does a pHin cost?
While the upfront cost of $349 pHin may be hard to swallow, it’s a relatively low price to pay considering weekly professional maintenance can range anywhere from $100 to $150.
Also to know is, does pHin have a battery?
The battery inside the unit is not replaceable.
Do smart pool monitors work?
The device works for both chlorine and salt pools. When you use SENSE, you’re using patented technology. The device uses special optical sensors and tech to provide clear readings and analyze the pool water’s quality. If you’re looking for an easy way to keep track of your pool’s water chemistry, the SENSE is for you.
Will pHin work without subscription?
Rest assured that your phone will operate just fine without active service from a carrier, leaving it as a Wifi-only device.
How long does pHin last?
Does pHin measure free chlorine?
pHin measures pH, ORP, free chlorine, total alkalinity, total hardness, cyanuric acid and temperature.
How do you calibrate pHin?
You hold the strip against a marked testing card, take a picture, and the app will analyze the chemistry of your pool based on the results of the strip against the testing card which will then calibrate the pHin.
How does a Phin filter work?
A phin filter consists of a round, perforated plate, a brewing chamber, a perforated insert, and a cap to keep the heat of the water inside of the phin. Using a phin takes time, as the coffee requires several minutes to brew and drip slowly through the perforated plate into the waiting mug below.
How do you monitor a pool?
How do you calibrate a pHin?
You merely put the test strip into the water, put it on a marked area of the calibration card, use your smartphone camera to take a snapshot of the reading, and hit send. The reading then goes to pHin where a technician analyzes your water’s chemical makeup and matches it to the sensor’s readings.
How much does Sutro pool monitor cost?
The monitor itself has an upfront cost of $499, and you have to subscribe to a monthly Sutro plan in order to use it. For $29 per month, the Basic plan gets you replacement cartridges on demand, email and chat support, chemical recommendations, and use of the Android and iOS mobile app.
What is a Phin?
A phin is a traditional coffee filter used to make Vietnamese coffee. The most common use is for making a single cup serving of coffee.
What does pHin pool monitor?
If you’re having trouble keeping your pool or spa water perfectly sanitized and crystal clear, the pHin Smart Water Monitor will tell you all you need to know about your water including the current temperature, sanitizer levels, and pH levels.
What is a Vietnamese Phin?
The phin, the device traditionally used to brew Vietnamese coffee, is comprised of four stainless steel parts: a plate, the body, a press disk, and the lid. Coffee, and the phin, were both introduced to Vietnam in 1800s by French colonialists, and France’s cafe culture as a whole took hold not long after.
What does pHin test for?
pHin measures your vessels’ pH, sanitizer level and temperature over 1000 times per week. There are many environmental factors that can temporarily affect water chemistry like: usage, weather, water temperature, sunlight exposure, etc.