The main difference between the inground and above-ground pumps is that above-ground pumps need manual priming, whereas inground pumps are “self-priming.” Since most inground pumps are above water level, this relates to the pump’s capacity to raise water vertically.
Correspondingly, what happens if I oversize my pool pump?
A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.
Accordingly, can an above ground pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
Is it better to run a pool pump at night or day?
It is best to run your pool’s pump during the day when the sun is out to reduce the risks of algae bloom and because there is generally more debris and contaminants that will enter your pool in the day.
Is 1 HP pool pump enough?
Let’s start with an unpopular and incredible statement: A typical size residential pool can be circulated effectively with a 1 HP pump.
How far from above ground pool should pump be?
If circumstances allow, stay close to the pool. Shorter pipe runs = less work for the pump which extends the life of the pump and uses less electricity. Our projects typically average a distance of 20–40 feet from the pool to the equipment, but as stated earlier, much longer runs are sometimes required.
Do you run pool pump while swimming?
Chemicals that you add to your pool while the water is circulating don’t need to be recirculated; they will stay mixed even if you don’t pump the water continually. Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
Should the pump stay on an above ground pool?
Minimum Turnover
Some experts recommend running your pump long enough to turn over the water at least twice a day. Others recommend just running it through once. Once again, the correct answer really just depends. If your pool sees heavy use, it’s going to accumulate more debris.
What size pump do I need for my 18 foot pool?
For round above ground pools up to 24 ft. ( pools with less than 15,300 gallons) use a 1 HP pump. For round above ground pools over 24 ft. (pools with more than 15.300 gallons) use a 1.5 HP pump.
Is it OK to run pool pump 24 hours a day?
A Rule of Thumb
Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
What size filter do I need for 20000 gallon pool?
Typical D.E. Filter sizes are 36 sq ft, 48 sq ft, 60 sq ft, and 72 sq ft (they also make a 100 sq ft Quad D.E. Filter). So you can easily get away with using a 48 sq ft D.E. Filter on a 20,000-gallon pool.