Over Current
Indicated that the drive is overloaded or the motor has an electrical problem. The drive will restart 20 seconds after the over current condition clears.
Keeping this in view, how long does a pool capacitor last?
Think – A pool pump capacitor generally has a lifetime rating of around 5,000 starts. While 5,000 sounds like a large number, it can go by very fast. So think about when you got your pump, give it a rough estimate. If you only use your pump once a day, 5,000 start is approximately 10-13 years.
Hereof, how do I program my Pentair Intelliflo VSF?
Should pool pump run continuously?
Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
How do I reset my Pentair IntelliFlo pool pump?
How do I program my Intelliflo variable speed pump?
How do you unlock Pentair Intelliflo?
Make sure the pump has power, green LED is on. Make sure the pump is not running. Press and hold all of the four Speed buttons simultaneously for four (or more) seconds. Power off the pump, wait a few seconds, power it back on.
Where are Pentair pool pumps manufactured?
Our manufacturing plant, located in St. Paul, Minneapolis, USA, produces products for fluid processing, respiratory, membrane, blood line and systems.
Why does my IntelliFlo pump keep shutting off?
It could be a bad drive, over voltage, under voltage, drive over heating, ect. You could eliminate it being a control problem by unplugging the control cable on the motor, and manually running it. If it does not do it anymore then it is a control issue.
How do I reset my Pentair Intelliflo variable speed pump?
To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.
Why does my Pentair pump keep stopping?
There are several reasons why your pump may randomly shut off—a behavior known as “pump tripping.” Most commonly, your pump may be operating at the wrong voltage, overheating, or simply failing to compete with your neighborhood’s electrical needs.
Why does my pool pump keep overheating and shutting off?
A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.
How do I program a Pentair Intelliflo VSF?
How do I reset my Pentair Intelliflo pump password?
Make sure the pump has power, green LED is on. Make sure the pump is not running. Press and hold all of the four Speed buttons simultaneously for four (or more) seconds. Power off the pump, wait a few seconds, power it back on.
How do you set a Pentair pool pump to run continuously?
Why does my pool pump keep turning on and off?
If you have a new pump or pool, your pump might be wired incorrectly or loosely! In the case your pump turns off a few seconds after turning it on you might even have a bad capacitor. Capacitors regulate the amount of power the pump gets and can go bad with age.