The Maytronics Dolphin Nautilus Robotic Cleaner is self-contained and fully automatic. Just drop it in your pool, turn it on and leave it for about 3 hours.
Moreover, how does Dolphin vacuum work?
All you need to do is to place the Dolphin in your pool and turn it on. The computer in the cleaner learns the dimensions of your pool and then programs itself to efficiently vacuum every inch of the pool. The debris and any dirt are brushed into a self contained vacuum bag.
Consequently, can you leave Dolphin Nautilus in the pool?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
Can you leave pool vacuum in pool overnight?
Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
How often should I run my Dolphin pool cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
Can you use an extension cord with Dolphin pool cleaner?
Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
How do you use the Nautilus pool vacuum on Dolphin?
How does a Dolphin pool cleaner work?
Dolphin Robotic Pool Cleaners
Dolphin is a robotic cleaner that circulates your pool, picking up debris and scrubbing away dirt and algae from the floor, walls, and waterline. Its smart technology maps out the most efficient cleaning route, navigates using PowerStream mobility, and can sense obstacles as it works.
How do I setup my dolphin pool cleaner?
Adjusting the handle angle
- Lay the handle down at an angle of 180º to the ground.
- Push the base of the arm into the body of the robot pool cleaner and slide it towards the rear of the robot pool cleaner until it clicks into the required position.