Maintenance
| Free Available Chlorine (FAC) | |
|---|---|
| What Is It? | The amount of active chlorine in the water |
| When To Test | Every day |
| Ideal Range | 1-4 ppm when using chlorine as the sanitizer |
| Product Used to Adjust | Any HTH® granular or tablet chlorine sanitizer according to label directions |
Similarly, how long after HTH shock Can you swim?
Keeping this in view, how often should I add chlorine to my pool?
Chlorine has a low pH level, and in order to maintain your pool water’s clarity and balance, shocking weekly will allow you to quickly raise the chlorine level, which will rid the pool of contaminants, without lowering the water’s pH levels.
What is HTH chlorine?
hth® Calcium Hypochlorite is one of the world’s leading brands of dry chlorine. Our products are available in a variety of pack sizes, in a choice of granular or briquette form and as a standard or easiflo® option (with an additional anti-scale feature to limit the maintenance of equipment and feeding systems).
How much HTH chlorine do I add to my pool?
Optimum chlorine levels in a standard pool range between 1-4 ppm. Dosage is based on the amount of water the pool holds. If you have a 500 gallon pop-up style pool, the dosage is 0.2 to 0.3 oz for a stabilized pool, and 0.4 to 0.6 oz for an unstabilized pool.
How do you take care of a pool for dummies?
How do you shock a HTH pool?
How do you use HTH chlorine granules?
Use a clean, dry scoop; do not use the scoop for other purposes. Add the recommended dosage during evening hours while the filter pump is running. Ensure that the product is broadcast evenly over a wide area in the deepest part of the pool. If granules settle along the bottom of the pool, use a brush to disperse them.
How much HTH shock do I need for a 1000 gallon pool?
For example, HTH Super Shock! asks for one pound per 13,500 gallons. So for a 21-thousand gallon pool, you’d want to round up to two pounds of shock. Always round up to make sure your pool gets enough chlorine.
What is needed for pool maintenance?
- Weekly Pool Maintenance. Thorough pool care will ensure clean and safe water throughout the swimming season. …
- Skim Off Leaves and Debris. …
- Brush Sediment from Pool Walls. …
- Vacuum the Pool. …
- Clean Skimmer. …
- Keep Your Pump Running. …
- Check Filter and Backwash As Needed. …
- Test Pool Water and Add Chemicals.
Is HTH good shock?
HTH Super Shock Treatment
The brand’s Super Shock Treatment is considered to be the best pool shock for removing algae. It was developed to kill algae and unwanted bacteria in swimming pools by delivering the perfect chlorine boost. This pool shock also leaves pool water crystal-clear within 24 hours.
How do you use HTH in a pool?
Can I do my own pool maintenance?
Depending on the equipment used, cleaning a pool yourself can take up to one hour and a half and you’ll need to do this weekly. However, on average most will spend 45 mins a week and a little bit of elbow grease to maintain their pool. This doesn’t include replacing equipment or balancing chemicals.
How do you use HTH filter cleaner?
It is easy to use. Simply add one quart of HTH Filter Cleaner to two gallons of warm water in a large plastic bucket. Place the filter cartridge or D.E. elements into the cleaning solution and soak overnight (12 to 16 hours for heavily soiled filters; six hours for lightly soiled filters).
How long after HTH Can you swim?
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
How long does HTH last?
HTH® Clear-4-Weeks.
How long does it take for HTH shock to work?
How does HTH Granular work?
1)Calcium Hypochlorite (Ca(ClO)²)
The key active ingredient in hth’s chlorinating granules, calcium hypochlorite is the Grim Reaper of fungi, algae, slime, bacteria, and other swimming pool nasties. It kills through oxidation, which disrupts the cellular processes of microorganisms.
What does pool maintenance include?
At California Pool Care this includes removing debris on the bottom of the pool, complete a chemical balance analysis which may require adding chlorine or other sanitizer to satisfy the pool requirements, test and adjust the chemical sanitizer levels, check the water level to be sure the pump is able to operate …
How often should I put chlorine in my pool?
Can you put chlorine granules in a floater?
Do NOT use chlorine granules in a floater or feeder. When you’re adding granules, broadcast them evenly over a wide area in the deepest part of the pool – NOT in the skimmer.
How do I clean my pool with HTH?
Shock treat with three cups of HTH granular or a sachet of HTH Shock It, following the instructions on the pack. Set the pool on filter for 24 hours. Backwash the pool for two minutes and rinse for 20 seconds.