The handle angle can be adjusted to determine the speed at which the robot advances along the water-line. To adjust the handle angle: Press the latch down and hold it in position. Move the handle to the desired position and release the latch to hold the handle in place.
Secondly, can you leave a dolphin pool cleaner in the pool?
This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
- press the Manual/Automatic Selection button ONCE only.
- The Digital screen will light up and the two (regular/fast) icons will show up.
- To choose regular or fast cleaning cycle use the right or left arrows.
- When you reach the required function press the Set/OK button.
Moreover, can you leave the Dolphin cleaner in the pool?
This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
How do I clean my dolphin Pool Cleaner filter?
Can you use an extension cord with Dolphin Pool Cleaner?
Amazon.com: Customer Questions & Answers. Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
How do I reset my dolphin?
Press and hold “Blue” and “Call” buttons to cold boot the Dolphin. Upon cold boot, when the display returns, type: 1277. A little menu will appear showing the reset options.
How do you troubleshoot a Dolphin pool cleaner?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
How do pool cleaners work?
It works by connecting directly to your skimmer or a dedicated suction line that pulls in water to the pump. The cleaner then moves around the pool, suctioning up sediment and debris and sending it to the pump filter basket and the pool filter.
How do I use a Dolphin pool cleaner?
How does the dolphin robotic pool cleaner work?
Dolphin Robotic Pool Cleaners
Dolphin is a robotic cleaner that circulates your pool, picking up debris and scrubbing away dirt and algae from the floor, walls, and waterline. Its smart technology maps out the most efficient cleaning route, navigates using PowerStream mobility, and can sense obstacles as it works.
How long should you run the dolphin pool cleaner?
The Maytronics Dolphin Nautilus Robotic Cleaner is self-contained and fully automatic. Just drop it in your pool, turn it on and leave it for about 3 hours.
How does dolphin vacuum work?
An automatic pool cleaner doesn’t have to be paid and it is completely independent. All you need to do is to place the Dolphin in your pool and turn it on. The computer in the cleaner learns the dimensions of your pool and then programs itself to efficiently vacuum every inch of the pool.
How do I use my Maytronics Pool Cleaner?
Just drop it in your pool, turn it on and leave it for about 3 hours. It scrubs and vacuums your entire pool, including the floor, the walls and waterline This guide shows you how easy a Maytronics Dolphin Cleaner is to set up and operate.
Why is my automatic pool vacuum not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
How do you troubleshoot a Maytronics dolphin?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
When should I run my pool sweep?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
How often should I run my dolphin pool cleaner?
I have owned a Dolphin Nautilus for about 4 years now. It cleans like a champ. My usual routine is to wait until the bottom of the pool is noticeably dirty before I run the robot. Generally, this may be once a week if the wind is not blowing too many leaves into the pool, twice a week if it is.
Can you leave pool vacuum in pool overnight?
Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
Why does my Dolphin Pool Cleaner do wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. When the water level is too high, the water line is very close to the coping. So when the cleaner starts to climb the wall, it hits the coping and flips on to its back.
How long is a Maytronics Dolphin cleaning cycle?
| S 300 | |
| Ideal pool length | Up to 12 m |
| Cleaning coverage | Floor, Walls & Waterline |
| Brushing | Brush + Active Scrubber |
| Cleaning cycle time | 1 or 2 hours |
How long does dolphin pool cleaner run?
Let the Dolphin Nautilus CC Plus robotic vacuum cleaner take over your pool cleaning duties for good. Easy to use and ideal for in-ground swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just
| Brand | DOLPHIN |
|---|---|
| Style | Nautilus CC Plus |
| Color | Blue/Black |
How do you put Dolphin in pool?
How do you get the Dolphin robot out of the pool?
The easiest and most fun way to get the robot out of the water:
- Log into the MyDolphin™ Plus app and click “Pick-up mode”.
- The robot will reach the wall closest to it, and will rise, and will wait for 3 minutes above the water surface.
- Grab the robot by the handle and pull it out the water.
How do you store the dolphin Pool Cleaner?
STORE CLEANER – Store the Pool Cleaner in an area that is out of the direct sun and where the temperature stays above 41 degrees. If you don’t have a Caddy, place the Cleaner on its side so that its weight does not flatten the brushes.
Can I leave my dolphin pool cleaner in the pool overnight?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.