4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 4″ | 305 |
Consequently, how many GPM will a 1 hp pump?
| Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
|---|---|---|
| Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
| 1 HP | 8 | 4 – 40 GPM (varies by TDH) |
| 1 1/2 HP | 11 | 4 – 40 GPM (varies by TDH) |
| 2 HP | 14 | 4 – 42 GPM (varies by TDH) |
| GPM | LPM |
|---|---|
| 2 – 1900 | 8 – 7200 |
| PSI | Bar |
| 75 | 5.2 |
| Pipe Sizes | |
In this regard, what is the flow rate of a 1.5 HP pool pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).
Can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
What size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.
How many gallons per minute does a 1 hp pump pump?
| Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
|---|---|---|
| Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
| 1 HP | 8 | 4 – 40 GPM (varies by TDH) |
| 1 1/2 HP | 11 | 4 – 40 GPM (varies by TDH) |
| 2 HP | 14 | 4 – 42 GPM (varies by TDH) |
What size filter do I need for a 15000 gallon pool?
How many gallons per minute does a 3 HP pool pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/7 Days |
|---|---|---|
| 1.0 HP | 60 | $10.08 |
| 1.5 HP | 68 | $15.12 |
| 2.0 HP | 76 | $20.16 |
| 3.0 HP | 85 | $30.24 |
How many GPM is a 2.5 HP pool pump?
How many gpm should my pool pump?
Calculate Maximum Flow Rate
The size of your pool’s pipes determines the maximum flow rate. Count the number of intake lines for your pool and refer to the common pipe sizes below: For each 1.5-inch intake line, the maximum flow rate is 42 GPM. For each 2-inch intake line, the maximum flow rate is 73 GPM.
How many GPM is my pool pump?
If you have a 35,000 gallon pool and want a turnover rate of 10 hours, you will need a pump with a flow rate of 56 gallons per minute.
| Pool Size (US Gallons) | Turnover (Hours) | Minimum Flow Rate |
|---|---|---|
| 35,000 | 10 Hours | 58 GPM |
| 24,000 | 8 Hours | 50 GPM |
| 24,000 | 10 Hours | 40 GPM |
How do I calculate pool pump flow rate?
Divide the total gallons of water in the pool by the turnover rate in hours. Ideal turnover rate is between six and eight hours. To run the pump less time each day, lower the turnover rate. This will give you the gallons per hour or GPH.
How many gpm should I run my pool pump?
Once you have your pool’s volume, divide it by eight to determine the number of gallons per hour (GPH) that need to be pumped. Most pool pumps go by gallons per minute rather than GPH, though. So to get that number, divide the GPH by 60 to determine how many gallons per minute (GPM) need to be pumped for full turnover.
What size pool pump do I need for a 15000 gallon pool?
10,000 – 15,000 gallon pools need a pool pump with flow rate between 20 and 35 GPM. Based on our flow rate per pump size(in hp) table above, a 1hp pool pump will generate this flow rate.
What RPM should I run my pool pump?
For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs. If after a few days your pool starts to look cloudy or hazy, you can set the pump to run at 2000 RPMs.
How many gallons per minute does a 2 HP pool pump?
The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.
How do I check my pool GPM?
Divide the total gallons of water in the pool by the turnover rate in hours. Ideal turnover rate is between six and eight hours. To run the pump less time each day, lower the turnover rate. This will give you the gallons per hour or GPH.
How many gallons per minute does a 1.5 HP pool pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
How do I know what size pool pump I need?
Length x Width x Average Depth x 28.31 = Volume in Liters
Here’s a quick example. Let’s say the shallow end of your pool is 3 feet deep and the deep end is 7 feet deep. Add those two together 3 feet +7 feet =10 feet. Divide that by 2, what you’ll end up with is having an average depth of 5 feet.
Is 1 HP pool pump enough?
Let’s start with an unpopular and incredible statement: A typical size residential pool can be circulated effectively with a 1 HP pump.
How long must a pool pump run?
What should my pool flow rate be?
You find the right flow rate for your pool by calculating its capacity in gallons. Then, divide that number by your desired turnover rate, ideally six to eight hours. Divide that answer by 60 to find the minimum gallons per minute, or GPM, flow rate required to achieve the desired turnover rate.
Is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
How many gallons per minute does a 3/4 HP pump?
Horsepower: 3/4. Flow: 10 GPM @ 100′ with 50 PSI discharge pressure.
How many GPM is 2 HP pool pump?
The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.
How many gpm does a 2 HP pool pump?
How many gallons per minute does a 7.5 HP pump?
7.5 HP Submersible 92 GPM Deep Well Water Pump – 230V – 3P – SS316 – 4″ – 370ft.
How many GPH should a pool have?
Determine how many gallons you need to pump per hour to clean all the water in your pool in eight hours. Divide the gallons of water your pool holds (answer from step 1) by eight. Using the example number of gallons previously given, this equation would look as follows: 24,000 gallons ÷ 8 hours = 3,000.
What is the best time to run a pool pump?
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
What is the flow rate of a Hayward Super pump?
Hayward Super Pump 1.5HP (1.1kw) Single Phase Pump – SP1616XE221 Flow Rate 16m3 hour. For more than 40 years, the Super Pump has been the benchmark for swimming pool pumps. Versatile, efficient and reliable, it satisfies all the demands you can make on a Hayward Pump.
Is a 1.5 HP pool pump good?
A 1-horsepower pump with the same resistance will work for pools up to 26,000 gallons, while a 1.5-horsepower pump is suitable for large pools up to 30,000 gallons. A massive 2-horsepower pump can clean pools up to 46,000 gallons.
What RPM should a pool pump run at?
The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.
How do I calculate my pool turnover rate?
Formula for Turnover Rate:
- Divide the pool shape into areas of constant depth, or constant slopes.
- Turnover Rate(TR) = Gallons divided by Flow Rate (FR) divided by 60. Flow Rate (FR) is measured by a flow meter.
What is the flow rate of a 1hp pool pump?
How many gpm does a 1.5 HP pool pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
How do I calculate gallons in my pool?
Length x width x average depth x 7.5 = volume (in gallons)
Length times width gives the surface area of the pool. Multiplying that by the average depth gives the volume in cubic meters. If you’d like to find the pool volume in gallons, multiply your results by 7.5, as there are 7.5 gallons for each cubic foot.
How many gpm does a 2.5 HP pool pump?
How do you calculate gpm on a pool pump?
Most pool pump specifications are expressed in gallons per minute (GPM). So, to convert from GPH to GPM, divide your GPH by 60 minutes – 2531 GPH / 60 = 42.2 GPM.
What size pump do I need for a 25000 gallon pool?
Calculate Flow Rate and Turnover
Flow rate is the number of gallons the pump moves per minute, and turnover is the minimum about of time to circulate all water through the filter. Your 25,000-gallon pool needs an output of 52 gallons per minute to circulate the water once every eight hours.
What size pump do I need for a 24 above ground pool?
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
How many gallons per minute does a 1 HP pool pump?
You can see from the chart that a 1 horsepower pump will give you 52 gallons per minute on a system with 64 feet of head. We want to give you the flow information on each pump so that you can come up with the right pump the first time.
How do I know what GPM my pool pump is?
Most pool pump specifications are expressed in gallons per minute (GPM). So, to convert from GPH to GPM, divide your GPH by 60 minutes – 2531 GPH / 60 = 42.2 GPM.
How do I identify my Hayward pool pump?
Luckily, most motor labels come with two searchable model numbers. Hayward labels (pictured) normally have a layout of the Motor Manufacturer model number listed at the upper left and Hayward’s proprietary motor model number normally listed at the bottom left.