What chemicals do you need for a vinyl pool?

by

Recommended Chemical Levels for LOOP-LOC Pool Liners:

  • pH (between 7.2 and 7.6)
  • Total Alkalinity (between 80 and 125 ppm)
  • Calcium Hardness (between 175 and 250 ppm minimum)
  • Free Chlorine Residual (between 1.0 and 1.5 ppm)
  • Cyanuric Acid (between 40 and 75 ppm)
  • Never mix chemicals together.

>> Click to read more <<

Moreover, can I put baking soda in my pool?

Baking soda is safe and straightforward to use, while also providing your pool with a clean, clear, sparkling water that is pleasant to swim in. Baking soda does not sting the eyes; neither can it cause drying of the skin.

In respect to this, how do I protect my pool liner from the sun? This is where the sun can do the most damage. If your pool gets a lot of sunlight, I always recommend to go with a thicker liner, and the sun will have to work harder to wear the liner down. I also make sure to wash down the water line area regularly with a vinyl cleaner that protects the vinyl from the sun’s rays.

Correspondingly, how do you take care of a small vinyl pool?

Can you put liquid chlorine in a vinyl pool?

Many techs say that chlorine gas should never be applied in these pools because it will lower the pH. Others also avoid liquid chlorine, or sodium hypochlorite — because it can concentrate and bleach the liner if the product isn’t broadcast evenly throughout the pool.

10 Related Question Answers Found

How many years should a pool liner last?

15-20 years

What type of shock is best for vinyl pools?

For a vinyl pool, we have two types of oxidizer that can be used safely and without having to pre-dissolve in a bucket before adding to the pool. Non-Chlorine Shock: This oxidizer is 100 percent potassium peroxymonosulfate, a mixture of salts that is completely safe to handle and store.

How do you shock a vinyl pool liner?

Can you shock a vinyl pool?

If your pool’s liner is made of vinyl, you’ll need to be careful about using too much shock. To avoid vinyl damage, you can mix shock with water in a bucket and make sure it’s completely dissolved before adding it to your pool. This will help the granules mix into the water better.

Do you brush a vinyl pool?

How do you clean the outside of a vinyl pool?

Skim the surface of your pool weekly, along with vacuuming and brushing it

  1. Test total alkalinity. …
  2. Skim the surface, vacuum the bottom, then brush the sides clean—in that order.

Will chlorine eat through pool liner?

Pool liners are much more resistant to fading from high chlorine levels than they used to be. Nonetheless, even if the color stays intact, continuous high chlorine level is corrosive, and affects the plasticity of the vinyl, by slowly pulling the resins from the material.

How do I keep my pool liner from drying out?

Sprinkle a thin layer of talcum powder over the interior of the liner. The powder soaks up any remaining moisture and also soaks up any moisture that collects during storage. Powder also prevents the liner from sticking to itself, which could otherwise cause it to tear or warp.

Can you use Clorox bleach in a vinyl pool?

How do I clean the top of my vinyl pool liner?

Mix vinegar, baking soda and hot water in a bucket. Use a mop to clean the liner. This will kill mold and mildew and leave the liner clean and fresh smelling.

Leave a Comment