Is a variable speed pool pump worth it?

A Worthwhile Investment

Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.

>> Click to read more <<

Similarly, do variable speed pumps last longer?

Keeping this in consideration, what speed should you run your variable speed pool pump at? Example of Variable Speed Settings

Generally, I run my equipment at 1700 RPMs for 10 hours. I run this with the saltwater generator set at 50% for 10 hours. In my case, 1700 RPM’s is the minimum I can do to reliably activate the saltwater generator and filter the pool.

Simply so, how do you size a variable speed pool pump?

Determine how many gallons you need to pump per hour to clean all the water in your pool in eight hours. Divide the gallons of water your pool holds (answer from step 1) by eight. Using the example number of gallons previously given, this equation would look as follows: 24,000 gallons ÷ 8 hours = 3,000.

How long is the warranty on a pool pump?

WARRANTY CARD

PRODUCT/PRODUCT CATEGORY LENGTH OF WARRANTY REQUIRES PROFESSIONAL INSTALLATION
Single-Phase, TEFC Super Duty Pumps 2 Years
SVRS Pumps 2 Years
SuperFlo® VS, SuperFlo® VST and SuperMax® VS Variable Speed Pumps 2 Years
IntelliFlo (#011018, #011028, #011059, #011060 and IntelliPro (#P6E6VS4H-209, #013028) 2 Years

Should I run my pool pump on high or low speed?

No matter what size pump you are using, running it at lower speeds saves energy – and money. For example, you could run your variable or two speed pump twice as long as you normally would on its higher speeds and still save money.

Which is better Pentair vs Hayward?

When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

How many hours a day should you run your pool pump in the winter?

4-6 hours a

Do pool pumps lose power over time?

Over time, older pumps can begin to deteriorate and lose power. In other cases, you might need to clean the filter or have it backwashed.

How long should I run my Pentair variable speed pump?

However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.

How often should a pool pump be serviced?

We recommend seeking a yearly checkup by a professional, just to make sure everything is in order, and running as it should be. The best time to do this is in spring, right before peak use, so you can guarantee friends and family a safe swim.

How many years does a variable speed pool pump last?

On average, pool pumps last eight to 12 years before needing replacement. Over time, it’s normal for pool parts to begin to wear down. In addition, swimming pool technology has come a long way in the last decade.

How long do Pentair pool pumps last?

eight to 12 years

Should I run my pool pump at night or during the day?

It’s best to run your pool pump during the day

Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!

How long does a Pentair variable speed pump last?

Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.

Where are Pentair pool pumps manufactured?

Our manufacturing plant, located in St. Paul, Minneapolis, USA, produces products for fluid processing, respiratory, membrane, blood line and systems.

Are variable speed well pumps worth it?

Variable speed well pumps, booster pumps, and pool pumps are a scam. These pumps use computerized controllers, also known as Variable Frequency Drives or VFD’s, and are designed to separate people from as much of their hard earned money as possible.

How long should I run my Pentair Intelliflo pump?

What is the purpose of a 2 speed pool pump?

Two-speed pool pumps are more energy-efficient than a single-speed pump, and work best on pools with water features. They run at two fixed speeds, high and low, and require a separate device such as an automation system to adjust between the two speeds.

Why does my pool pump keep stopping?

If you have a new pump or pool, your pump might be wired incorrectly or loosely! In the case your pump turns off a few seconds after turning it on you might even have a bad capacitor. Capacitors regulate the amount of power the pump gets and can go bad with age.

How long should you run a pool pump daily?

8 hours a day

Is it better to run a pool pump at night or day?

It’s best to run your pool pump during the day

Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!

How long does a Hayward variable speed pump last?

Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.

Are Pentair pumps better than Hayward?

When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

How do I choose a variable speed pool pump?

Choose the low setting to save power and money when you’re simply filtering the water. Choose the high-speed setting when you’re doing more demanding tasks, such as vacuuming or adding chemicals. Variable-speed pumps let you control the speed, whether low or high or anywhere in between.

Should I run my variable speed pool pump all the time?

First, we do not recommend running your variable speed pump at 3450 RPMs for 24 hours a day. It’s unnecessary and frankly, it defeats the entire purpose of a variable speed pump. The idea is to try and run your variable speed pump at the lowest RPMs as possible while still filtering your pool water properly.

What size pump do I need for a 15000 gallon pool?

A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.

What RPM should I run my Pentair pool pump?

How many hours should I run my variable speed pool pump?

However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.

Does Pentair make good pumps?

The Pentair SuperFlo is easy to install due to its compact, durable design, and easy step-by-step instructions. It is easily programmable and works great for as a replacement. With an ultra-quiet TEFC motor, there is still enough power to circulate large amounts of water.

How do I change the speed of my pool pump?

How long does a Pentair IntelliFlo pump last?

between 8 to 15 years

What happens if your pool pump is too big for your pool?

Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.

What is the most energy efficient pool pump?

TriStar® VS variable speed pool pumps are the most energy efficient on the market, according to EPA ENERGY STAR 3rd party testing data. Saving pool owners up to 90% on energy costs, they are specifically designed to replace most single speed pool pumps.

What RPM should you run your pool pump?

For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs. If after a few days your pool starts to look cloudy or hazy, you can set the pump to run at 2000 RPMs.

Can I replace my 1 HP pool pump with a 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.

How do I run my pool pump 24 hours?

How long does a variable speed pool pump last?

Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.

How many hours should I run my pool pump in the winter?

4-6 hours a

Is it OK to run pool pump 24 hours a day?

The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.

Are energy efficient pool pumps worth it?

Energy efficient pool pumps are a great way to save money on your home’s energy costs. If you’re considering a new pool or renovating your old one, it’s important to look towards long-term costs, rather than short-term payments. Your wallet and the environment will thank you in the long run.

How long does a variable pool pump last?

eight to 12 years

Is Pentair better than Hayward?

When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

Is it better to run pool pump at night?

It’s best to run your pool pump during the day

Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!

What are the best hours to run your pool pump?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.

How many RPM should I run my pool pump?

Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.

How many hours a day should I run my pool pump?

approximately 8 hours a day

How long should a Hayward pool pump motor last?

10-12 years

What RPM should I run my Hayward variable speed pump?

Why are variable speed pool pumps better?

With a variable speed pump a pool owner can circulate their water at lower flow rates for a more prolonged period of the day without added energy consumption. This study by the National Renewable Energy Laboratory confirms that variable speed pumps are significantly more energy efficient than single speed pumps.

How do I change the speed on my Hayward pool pump?

What are the benefits of a 2 speed pool pump?

Two Speed Pumps – What Are the Benefits?

  • Save on electricity. During the grueling months of summer, some pool owners will run their pumps 24 hrs a day, 7 days a week, to ensure the water is filtered continuously to remain clean and clear. …
  • Save on Chemicals. …
  • Save on Water. …
  • Save on Time.

Are 2 speed pool pumps worth it?

At River Pools, we used two speed pumps for years with great success. They are quite a bit more expensive to purchase than single speed pumps and last the same amount of time, which is typically 3-8 years. On average, a two-speed pump will save about 50%-70% on energy cost compared to a one-speed pump.

What size pump do I need for my pool?

Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.

How long should a Pentair pool pump last?

eight to 12 years

How do you set a Pentair variable speed pump?

How do you use Pentair superflo VST?

How much more efficient are variable speed pool pumps?

Basically, variable speed pumps are the Cadillac of pool pumps, and most studies show that they are 90% more efficient than standard one-speed pumps. This typically equates to an operating cost of approximately $20-$30 per month.

Can I put a variable speed motor on my pool pump?

Variable speed pump replacement motors can be installed on existing single-speed pumps. Upgrading to a variable speed motor is all that is necessary to convert pools into high-efficiency systems. Service technicians should select the variable speed motor that is appropriate for the size of pool, plumbing and pump.

What size pump do I need for a 24 above ground pool?

Round Above Ground Pool:

For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.

How do you vacuum a pool with a variable speed pump?

How long do Pentair variable speed pool pumps last?

between 8 to 15 years

What speed should I run my variable pool pump?

If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.

Should pool pump be on when swimming?

There is no specific need to. The pumps primary job is to circulate water and to move it through the filter. The 1st part of that happens on its own with people in the water.

Can I replace a 1.5 HP pool pump with a 2.0 HP?

Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.

How do I set my Pentair pool pump to run 24 hours?

How much does a Pentair variable speed pump cost?

Intelliflo Pumps Start at Only $1,199. – Visit our Online Store. Get Pentair Intelliflo Pumps here.

What is the lifespan of a swimming pool pump?

Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.

What is the normal pressure of a Hayward pool pump?

Generally speaking, a pressure reading between 10 – 25 psi can be considered normal. Once you have installed a new filter, turn everything on and take a baseline reading. Each time that you change your pool filter take a new baseline reading.

How long does a pool pump normally last?

eight to 12 years

What is the benefit of a 2 speed pool pump?

Two-speed pool pumps are more energy-efficient than a single-speed pump, and work best on pools with water features. They run at two fixed speeds, high and low, and require a separate device such as an automation system to adjust between the two speeds.

How do you know when a pool pump is going bad?

Your pump could be leaking water, or the bearings might need to be replaced instead of the entire motor. Screeching is also a sign that your motor bearings need to be replaced. These loud, often painful sounds could also be a sign of rust or oxidation, making it more difficult for the bearings to do their job.

Why is variable speed pump efficient?

When the diameter of your PVC piping is not big enough to accommodate the horsepower, it can restrict the flow rate making the pump work harder. Most variable-speed models also feature a permanent magnet motor. This is the same technology used in smart cars, and far more efficient than a traditional induction motor.

How do you know if your pool pump is going out?

Signs You Need Pool Pump Replacement

  • Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
  • Grinding or Screeching Sounds. …
  • Blowing Bubbles and Spitting Water. …
  • Old Age. …
  • Get a New Pool Pump Now to Keep Enjoying Safe Water.

Do variable speed pool pumps last longer?

How do I set the Pentair variable speed pump?

Why is my pool pump so noisy?

One of the most common causes for a noisy pump is that it’s running dry. This can happen for a few reasons—the most common of which have to do with the skimmer plate built into the side of the pool. If your pool water level has fallen below halfway down the skimmer, your pump might be sucking in air as well as water.

How do you control a 2 speed pool pump?

Who makes Hayward pumps?

Hayward Industries, Inc.

What is the difference between a 2 speed and variable speed pool pump?

Dual speed pumps can be run at a lower speed, however they still run at the same amount of amperage, where as a variable speed pump can run at a lower speed and use less energy. It does this by using a permanent magnetic motor similar to the ones found on today’s hybrid cars.

How many hours should a variable speed pool pump run?

However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.

How long do you need to run a pool pump?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool’s size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool’s turnover rate is.

When should I replace my pool pump motor?

On average, pool pumps last eight to 12 years before needing replacement.

What RPM should I run my pool at?

The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.

What speed should a Hayward pool pump run?

Since a variable speed Hayward pool pump can operate at speeds as low as 600 RPM, it will also be much quieter than a single speed pump that runs at 3,450 RPM. Generally speaking, higher RPMs equals more noise and that is certainly not what anyone wants out of their pool pump.

How do you know if your pool pump is burnt out?

How many hours should I run my pool pump?

8 hours

How do you program a variable speed pump?

How long do Pentair pumps last?

Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years. Modern pumps are made of hard plastic and will over time warp.

How do you know when your pool pump needs to be replaced?

If there are no leaks, you may either have a clogged pump or the suction motor is wearing out. Over time, your motor will wear out. This is inevitable. If you’ve ruled out other issues and your pump is reaching 12 or more years old, it may be time to consider swimming pool pump replacement.

What RPM should pool pump run at?

The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.

Which is better Hayward vs Pentair?

When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

What speed should I run my Pentair variable speed pump?

Is a 1.5 HP pool pump good?

With that in mind, a 0.5-horsepower pump with 40 feet of head resistance is suitable for small pools up to 11,000 gallons. A 1-horsepower pump with the same resistance will work for pools up to 26,000 gallons, while a 1.5-horsepower pump is suitable for large pools up to 30,000 gallons.

Should I run my pool pump at night in winter?

Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.

Why is pool pump making loud noise?

This high-pitched screaming noise could simply be a sign that something is caught inside the pump, like in the impeller. Sometimes, the obstruction will clear as the pump works. The sound will go away as things go back to normal. However, this noise can be a sign that the pump’s bearings have worn down too much.

What are the benefits of a variable speed pool pump?

The lower speed allows the filter to catch more debris, resulting in cleaner pool water. Variable-speed pumps operating at lower speeds generate less head pressure. This decreases stress on not only the pump but the rest of the system as well, resulting in less maintenance and longer equipment lifetime.

Are Hayward pool pumps good?

One of the most reliable pumps on the market, the Hayward Super Pump has made a name for itself because of its reliability. But there is much more to it. It is quiet and energy-efficient and the clear basket that requires no tools to remove making it easy to maintain.

What is a VS pump?

The Taurus VS pump is the most electrically-versatile pump on the market; it can operate on either 115- or 230-volt power, single-phase, 50Hz or 60Hz. The easy-to-access wiring compartment makes connection fast and simple.

What size pump do I need for a 30000 gallon pool?

30,000 gallons ÷ 24 hours = 1250 gallons/hour.

Can a pool pump be too big?

You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.

How do you backwash Pentair superflo?

Leave a Comment