How many amps does a 1 HP pool pump draw?

10 to 12 Amps

>> Click to read more <<

Subsequently, what size breaker do I need for pool pump?

20-amp

In this way, how many amps does a 1.5 HP pump use? For example a 1.5 HP Baldor motor turning 3450 rpm draws 13.4 amps on 120 volt service.

Also question is, how many amps does a Hayward Super pump?

Answer: The Hayward SP2605X7 Super Pump . 75-HP Max-Rated Single-Speed Pool Pump is rated at 11 amps at 115 VAC (5.5 amps at 230 VAC).

How many amps does a variable speed pool pump use?

15-amp

How much electricity does a 1 hp motor use?

The 1 HP motor consumes 746 Watts regardless of how many hours it is running. Watt and HP are not units of energy. It will consume in 1 hour. 746 KWH of energy.

How many amps does a pool pump take?

Pool Heat Pump: 240v, 50 amps.

How much electricity does a 1 HP pool pump use?

1.75 Kw per hour

How many amps is a 1hp Hayward pool pump?

The 1 HP Power Flo Matrix PN SPX1510Z1XE is rated for 12 amps.

How do you check the amp on a pool pump?

REMOVE ELECTRICAL COVER – Unscrew the two screws that hold the cover over the back end of the motor. Remove the cover to expose the electrical connectors. You will be measuring the amperage of the supply power coming into the pool motor labeled L1 and L2.

Do pool pumps use a lot of electricity?

One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.

How many amps is a Hayward 1.5 HP pool pump?

The 1.5HP pump is drawing 17 Amps on initial start up for about 2 seconds (literally), and then drops to 12 Amps and hums away.

Leave a Comment