Add Chlorine to Your Pool to Ensure a Clean Opening
In the fall, make sure to add chlorine and algaecide to your pool for over the winter. Don’t add too much chlorine though. If the chlorine level is too high over the winter, you can bleach the liner.
Also to know is, do you need to shock your pool in the winter?
Shocking the pool during the winter months can certainly help to avoid a green swamp-like pool in the spring. It’s often recommended. However, poor water balance or improper application can lead to unintended consequences, such as discoloration and damage to pool surfaces.
Furthermore, do I need to add chemicals to my pool in the winter?
Ideally, your pool’s chemistry should remain as balanced as possible throughout the winter. Keeping everything balanced is easily accomplished by testing the water at least once per week. There’s a low chance that you’ll need to add chlorine as long as the pool isn’t being used and there is no water circulation.
How do you shock a pool after winter?
The best way to administer shock into your pool is by pouring it into a bucket of water with at least a couple gallons of water. Mix it to dissolve and pour the mixture around the perimeter of the pool. Remember: Always add shock to water, never add water to shock! Now it’s time to wait a while.
Does pool shock work in cold water?
The cold water, anything below 65°, has an impact on the ability of the chemicals to dissolve properly. I would recommend using liquid chlorine if you have to shock in lower temperatures. You can dissolve granular shock in warm water. Perhaps it will work if you completely dissolve it before adding it to the pool.
What chemicals do you put in pool for winter?
What Pool Closing Chemicals Do You Need?
- Chlorine-Free Pool Shock: Add 2 days before closing the pool.
- Stain & Scale Treatment: Add 1 day before closing the pool.
- Winter Algaecide: Pour into the pool just before covering.
- Winter Floater: Place into the pool just before covering.
Should I remove salt cell for winter?
It is best practice to remove your salt cell during the colder winter months. By removing your cell, you limit the potential damage that may occur to the unit during cold or freezing temperatures. The cold water and temperatures can damage the plates and stop the salt cell from functioning as intended.
When should I run my pool pump in the winter?
Even if you have your pool covered, some debris may still get in it during the winter. For this reason, you should consider running your pump on occasion whenever the outdoor temperature is between 35 and 65 degrees. Around four to six hours should be sufficient to remove debris and help promote good circulation.