Keeping this in consideration, how do you unlock Pentair Intelliflo?
TO UNLOCK THE PUMP:
Press and hold the “1” and Quick Clean buttons for atleast 3 seconds. “Enter Loc Code” will scroll across the screen.
Additionally, how do you set the Pentair pool pump timer?
Setting the Time:
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to navigate to “Settings”
- Press “Select”
- Navigate to “Date/Time”
- Press Select.
- Use the Up or Down Arrows to navigate to the Time Settings, first we’ll do the Time Format.
How do you reset pool pump after power outage?
Close any drain plugs or valves you may have opened during the power outage. Turn the breakers back on and prime the pool pump by adding water to the pot, replace the lid and turn the pool pump on. Ensure your pool pump and filter are working, and then let them run for one hour to begin decontamination.
How do I reset my Pentair IntelliConnect?
Power down the IntelliConnect for ten (10) seconds to reset access point mode and proceed to Step 14 for recommendations on improving the signal/connection strength.
How many RPMs should my pool pump run at?
The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.
How do I reset my Pentair Intelliflo variable speed pump?
To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.