How do I adjust my Dolphin Pool Cleaner?

The handle angle can be adjusted to determine the speed at which the robot advances along the water-line. To adjust the handle angle: Press the latch down and hold it in position. Move the handle to the desired position and release the latch to hold the handle in place.

>> Click to read more <<

Regarding this, why is my Dolphin Pool Cleaner not moving?

The first step is to check that the filter basket or filter bag is clean and not full causing lack of water flow. If the filters or bag is overly full this can compromise the robotic pool cleaner’s ability to efficiently navigate around the swimming pool.

Also, how long is Maytronics warranty? The Best Warranty in the Industry

Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years.

Hereof, why does my dolphin keep turning off?

Most likely – a clogged impeller. This is common, easy to fix, and the video below shows you how to unscrew the cover to get to your impeller. My impeller was clear of debris, but REALLY difficult to spin by hand, so I figured my motor was bad, and I was right.

How do I turn on my Maytronics pool cleaner?

TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.

Why won’t my dolphin pool cleaner climb walls?

My Dolphin Won’t Climb Walls / Gets Stuck

Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.

How does dolphin vacuum work?

An automatic pool cleaner doesn’t have to be paid and it is completely independent. All you need to do is to place the Dolphin in your pool and turn it on. The computer in the cleaner learns the dimensions of your pool and then programs itself to efficiently vacuum every inch of the pool.

Why is my automatic pool vacuum not moving?

If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.

How do you test a dolphin pool cleaner?

Insert the two meter probes into the socket of the Amphenol Plug. The meter should read close to 29V DC. If you see 29V DC, the Amphenolotor Plug is good and you can go to Test 5A to check the Dolphin Motor.

Can I leave my Dolphin Pool Cleaner in the pool overnight?

While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.

How does dolphin Nautilus work?

The Dolphin Nautilus CC Plus has dual-layered filtration, where large debris is caught by one filter and small by another layer. This allows for better-directed cleaning and a faster return to cleaning. For a pool cleaner already designed to make fast work of cleaning your pool, this is a significant feature.

Leave a Comment