How do I use Dolphin cleaner? - Best Pool Adviser

Thereof, how do I reset my Dolphin?

Press and hold “Blue” and “Call” buttons to cold boot the Dolphin. Upon cold boot, when the display returns, type: 1277. A little menu will appear showing the reset options.

Also question is, can I leave my dolphin Pool Cleaner in the pool overnight? Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.

Also know, why is my pool cleaner not working?

If you have a suction pool cleaner that is not moving, check the cleaner hose. It should be firmly attached to the suction line in the skimmer or the cleaner line. If you check these and they are all connected, the next thing to do would be to make sure there are no air leaks in the hose.

How do I turn on my Maytronics pool vacuum?

TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.

How do you turn on a pool cleaner robot?

How does Maytronics dolphin work?

Dolphin is a robotic cleaner that circulates your pool, picking up debris and scrubbing away dirt and algae from the floor, walls, and waterline. Its smart technology maps out the most efficient cleaning route, navigates using PowerStream mobility, and can sense obstacles as it works.

How do you use the Dolphin pool cleaner remote?

Using the remote control

Press the On/Off button once. The remote control will start in manual direction control mode.
Use the direction control arrows (see right) to control the movement of the robot around the pool.
To exit the manual direction control mode, press the Manual/Automatic select button once only.