Beginning with ‘SP’ followed by four numbers, sometimes ending with a suffix of numbers and letters, is how Hayward identifies most of their products. After you’ve found and copied down this number enter it into Inyo’s “Keyword or Part #” search, the result will be the direct replacement for your pump motor.
Regarding this, why is my pool pump not working?
It could be something blocking it, a dirty pool filter, or too much air in the system. If there’s something blocking your pump’s suction, check your filter gauge. If it’s 10psi above the normal reading, clean your filter. This will reduce pressure and reset your pump’s flow.
All pool filters are labeled with an information tag on their tank. This tag includes the name of the manufacturer, model name, the various sizes of the filter in that line of models. The size of your specific unit should be marked or highlighted on this tag.
Moreover, how long do Hayward pool pumps last?
Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years.
How can you tell if your pool pump is going bad?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
How many gpm does a 1.5 HP pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM). Make sure the the lines going back to the pool will also support the same level of flow. In the diagram to the right, the system is plumbed in 2.0 inch pipe.
Can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
What is the flow rate of a 1.5 HP pool pump?
This product by Hayward is a 1.5hp pool pump designed to pump up to 90 GPM in most pools. It requires less maintenance and is highly efficient.
Do pool pumps come with a warranty?
The pool kit, pump and sand filter, pool liner and ladder are all warrantied separately and cover different manufacturer defects, not wear and tear.
How long do Hayward pumps last?
How do you know if your pool pump motor is bad?
Don’t Wait to Call for Swimming Pool Pump Replacement
- Age. Yes, the age of your pump is an early trouble sign. …
- Noise. Your pool pump should run quietly. …
- Power Trip. Has your pool pump motor started to trip your electric breaker box more and more frequently? …
- Swimming Pool Pump Motor Keeps Shutting Off. …
- Loss of Suction.
What causes a pool pump to burn out?
A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.
How do you troubleshoot a Hayward pool pump?
How to Troubleshoot a Hayward Pool Pump
- Step 1: Check the Hoses. Tighten all hose connections on the pump and filter. …
- Step 2: Inspect the Pressure Gauge. …
- Step 3: Check the Skimmer Basket. …
- Step 4: Remove Debris. …
- Step 5: Inspect the Impeller. …
- Step 6: Backwash the Filter. …
- Step 7: Replace the Sand or DE.
Do pool pumps have warranty?
What’s Covered in a Home Warranty with Pool & Spa Pump Coverage? Because the pool or spa system can be complex, coverage is extended to some, but not all, parts and components of your system. If the pool and spa pump is on a shared system, then shared heating, pumping, and filtration equipment is covered.
Can I replace a 1hp pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
How do I know what type of pool pump I have?
How much does a Hayward pool pump cost?
How do you read pool pump labels?
Why is my Hayward pool pump not working?
If the pump won’t pump water fully, check that:
Pump lid o-ring is a good fit, in good condition, and lubricated. Pump lid cover is Tight (really tight). Impeller is not clogged with small debris. Check that pump basket is not broken or misaligned.
How long is pool pump warranty?
The Industry’s Best 3-Year Warranty
All products manufactured by Hayward Flow Control are warranted against defects in material or workmanship for a period of three years from date of shipment.
How do I know what size pool pump I need?
Sizing the Pump for Your Swimming Pool
- Circular Pools: Diameter (ft.) x Diameter (ft.) x Average Depth (ft.) x 5.9 = Total pool capacity in gallons.
- Oval Pools: Length (ft.) x Width (ft.) x Average Depth (ft.) x 6.7 = Total pool capacity in gallons.
- Rectangular Pools: Length (ft.) x Width (ft.) x Average Depth (ft.)
How many GPM is a Hayward pool pump?
4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 4″ | 305 |
Which pool pump is better Hayward vs Pentair?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
What is the warranty on a Hayward?
To Buyer, as original purchaser of the Goods, Hayward warrants its products free from defects in materials and workmanship for a period of one year from the date of purchase.
Where is the model number on Aqua Rite?
The model number is on the inside of the door. It should be something like AQ-RITE. It’s right by the barcode.
How long should a Hayward pool pump motor last?
What size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.
How long is a Hayward pool pump warranty?
How much does a pool pump cost?
On average, pool pump replacement costs about $440, average prices ranged from $80 to $800 for pool pump replacement in the US in 2020.
What size pump do I need for a 30000 gallon pool?
So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate. To establish the max flow rate needed for your swimming pool, I like to go by filter surface area.
Where is the model number on a Hayward multiport valve?
The easiest way to identify your multiport valve is to find a manufacturers part code, this is normally found along the front face of the multiport valve. Once you have identified this number we can then use it and match it up to a valve that suits your pools filtration system.
How much does labor cost to replace a pool pump?
Swimming Pool Water Pump Costs
| Item | Cost |
|---|---|
| Pump | $900-$1,500 |
| Labor Cost | $250 |
| Total Cost | $1,150-$1,750 |
How much is a new Hayward pool pump?
What is the standard warranty on a pool?
The industry standard warranty on most pool components is one year although some builders have agreements with their equipment providers that extends their coverage to three years.
How much HP pump do I need?
Example – Horsepower Required to Pump Water
| Power Required to Pump Water (hp) | ||
|---|---|---|
| Volume Flow (gpm) | Height (ft) | |
| 10 | 0.0126 | 0.0758 |
| 15 | 0.0189 | 0.114 |
| 20 | 0.0253 | 0.152 |
What to do if pool pump stops working?
What size pool pump do I need for a 30 000 gallon pool?
So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate. To establish the max flow rate needed for your swimming pool, I like to go by filter surface area.
How do I know what model pool pump I have?
How do you read a Hayward serial number?
Hayward’s serial numbers for all products, with the exception of some cleaners, controls, heat pumps and electronic chlorinators, are 17 digits long and begin with the numbers ’21’. Often these numbers appear on product labels with spaces or parentheses.
How long does a Hayward pool pump last?
Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years.
How old is my Hayward pool pump?
The 5th and 6th digits of the serial number of a Hayward heat pump pool heater are the year of manufacture, and the next two are the month. So the example shown below was produced in August, 2017. This serial number system has been in effect since May, 2010.
How much does it cost to rebuild a pool pump motor?
If the pool pump is still under warranty, it’s a good idea to replace the whole pump. Merely replacing the motor is less costly than replacing the whole pool pump. A DIY motor replacement costs around $25 to $200, while hiring a professional can cost an additional $40 to $100.
How long should pool pump motor last?
How long does a pump motor last? Most pool pump motors last at least 6-8 years, often longer. But that’s if you’re referring to magnetic drive pool motors, which are used in newer variable speed pumps.
What is the difference between w3sp2610x15 and sp2610x15?
Question: What is the difference between sp2610x15 and w3sp2610x15? Answer: This is the same part.
How long do Hayward above ground pool pumps last?
Where do I find the model number on my pool pump?
The first place you want to check is typically the easiest- the strainer lid. The strainer lid on your pump basket is located on the wet end of your pump or, on the opposite side of your motor. Typically, pump manufacturers will stamp their part number on one of the sides of the lid or somewhere along the handle.
How long should a above ground pool pump last?
Why won’t my pool pump come on?
When a pump doesn’t turn on or starts shutting off quickly after it’s started, it’s usually an electrical problem, which could mean loose connections, a bad capacitor or overloaded voltage. But it could also be a jammed motor.
How do I know if my pool pump is failing?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
How many gallons per minute does a Hayward Super pump?
7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 2″ | 85 |
| 2.5″ | 120 |
| 3″ | 180 |
| 4″ | 305 |