From Polaris Website, 380 requires a booster pump, 360 requires a dedicated pressure line without an additional pump: Powered by triple jets and a separate booster pump, the Polaris 380 is one of our most powerful, durable cleaners and is suitable for all in-ground pools.
Accordingly, how many bearings does a Polaris 360 have?
People also ask, how do I know what model Polaris pool cleaner I have?
The serial number can be found on the back of the cleaner. The older cleaner models have the serial numbers stamped/molded onto them. The newer Polaris cleaner models have the serial number stamped on a sticker on the back of the cleaner.
Why does my Polaris 360 go in circles?
Your first issue is to resolve the problem of the cleaner getting stuck or going in circles. This is most likely caused when pool cleaners are left in the pool 24/7. When the water is cold or cools off from a warm day, the plastic in the hose gets a memory and curls slightly.
Where is the Polaris serial number?
The Vehicle Identification Number (VIN) of your Polaris ATV is a unique number used to identify your vehicle. It is stamped on the frame of your ATV.
Why is my Polaris 360 slow?
Since the 360 is basically an automatic vacuum cleaner for your pool, there may be times when the machine starts to slow down due to the filters clogging with debris. If you notice the 360 slowing down, clean out all of the filters and baskets. Start with the filter screen in the quick disconnect on the hose.
Is Polaris 360 better than 280?
When comparing and contrasting the Polaris 280 and the 360, the 360 is the pretty obvious winner. They’re both excellent pressure side pool cleaners with well-deserved reputations for speed and excellent quality.
How long should you run your Polaris pool cleaner?
If you want to keep the pool clean, you can run the 280 for as long as you want, but it will wear out quicker if you run it a lot. It takes about 3 hours to clean a standard pool.
Why is Polaris pool cleaner not moving?
A Polaris cleaner has water tubes inside that direct pressure throughout the cleaning unit. They can sometimes become disconnected, which reduces the internal pressure, which makes the cleaner stop moving. Open up the cleaner and make sure all the internal tubing is connected the way it’s supposed to be.