The power supply is water resistant but not waterproof. Please cover the power supply if inclement weather approaches. Do not leave the power supply in standing water as this will damage the internal components.
Additionally, why is my dolphin pool cleaner not climbing walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
Thereof, how do you test a Maytronics power supply?
Testing the power supply
- Connect the tester to the power supply.
- Switch the power supply on.
- If the tester light is on, proceed to test the cable.
- If the tester light is off, check the power socket and AC cable. If they are working, then replace the power supply and proceed to test the cable.
How do I test my pool cleaner power supply?
Why can’t you use an extension cord with a Dolphin pool cleaner?
It should have a GFCI protected outlet within 20 feet of the pool. Do not use an extension cord. In a wet deck environment the risk of stray voltage while small is signicant. I suspect an electrician would not charge that much to install a couple of convenience outlets.
How do you test a dolphin power supply?
How do you troubleshoot a dolphin pool cleaner?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
How long is Maytronics warranty?
How often should I run my dolphin Pool Cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
Can I leave my robotic Pool Cleaner in the pool?
You may only need to run the cycle two to three times a week. Leaving the machine in the water during that time exposes it to the elements unnecessarily. This exposure could cause the seals to deteriorate faster, allowing for leaks and damage to the electronic components.