The pump itself has a freeze protection feature that can be enabled to turn the pump on to protect the pump during freezing weather…
Simply so, what temp should I set my pool freeze protection?
We do recommend that you set the freeze temperature at 40-45 degrees just to be safe. During extremely harsh weather (low 20’s and windy) you might consider just leaving the pump running 24 hours per day until the weather gets back up into the upper 20’s. You have to use your best judgment on this.
Just so, will running pool pump prevent freezing?
Helpful tips to keep your pool and its equipment safe during freezing temperatures. Run your pool pump continuously when temperatures are near or below freezing. You don’t need to run your heater, moving water likely will not freeze.
Should I heat pool during freeze?
DO NOT use heater during extreme cold unless it has been constantly running prior to the drop in temperature. Manufacturers state heaters should not be run at temperatures 68 and below. Adjust pool and spa jets upwards to reduce surface freezing.
What does egg timer mean on pool pump?
The Egg Timer count down feature allows you to define the run time for different circuits. For example, whenever. you manually switch your spa on, you would like it to automatically turn off in two hours.
What is thermal mode on pool pump?
This feature allows you to set a speed (450- 3450 RPM) or flow (20-140 GPM) that runs when the IntelliFlo® VSF Variable Speed and Flow Pump goes into Thermal Mode. The temperature level that you wish Thermal Mode to start can also be set. IMPORTANT: This feature is for protection of the pump.
What is freeze protection on Pentair?
The system detects all devices that have Freeze Protection ON, and activates the device to stop the pipes from freezing. If freeze protec- tion is only applied to one body of water. Note: If the pool or spa is running a schedule or operated manually, this will override freeze protection.
At what temp will pool pump freeze?
If you have an above ground pool with the pool filter system and plumbing above ground (like nearly all above ground pools), pipes and pumps can freeze up in less than an hour of minus 32 degrees.
Should I heat my pool to keep it from freezing?
Keep your pool heated at a constant temperature above the freezing point. If you’re concerned about costs, use a pool heat pump; this is a more efficient way to heat your pool. Keep the pool covered to lock in heat. A solar cover is great at retaining heat from your heater.
How does freeze guard work on pool?
Freeze guards are set at 36 degrees and will turn your main circulating pump on and will keep it on until the temperature rises back above 36 degrees. Should your Freeze Guard fail when the temperature drops water may freezes in the pipes. This freeze will block the flow of water running through the pool pump motor.
How do I turn off Pentair freeze protection?
Does Pentair Easy Touch have freeze protection?
This will turn your pool equipment on when the air temp drops really low so your pipes don’t freeze.