People also ask, how do you backwash a pool pump?
Keeping this in view, how long do you rinse after backwash?
Turn the lever to RINSE, start the pump and rinse for about 15-30 seconds. Stop the pump and turn the lever to FILTER. This is the normal operating position. Close the drain outlet valve and start the pump.
How do you backwash An old pool filter?
How to Backwash a DE Pool Filter
- Step 1: Turn off pool equipment. …
- Step 2: Rotate the valve to the “Backwash” position. …
- Step 3: Turn equipment back on and run the first cycle. …
- Step 4: Turn the equipment off again.
- Step 5: Rotate the valve to the “Rinse” position.
- Step 6: Turn equipment back on and run the second cycle.
How do you use Pentair backwash valve?
How do you use a Pentair backwash valve?
How do I backwash my pool filter cartridge?
Backwashing is a fairly simple process. Simply turn off the pool pump, set the multiport valve handle to “backwash”, let it run for two minutes (or until the glass viewport on the filter is clear). Turn off the pump, set the multiport valve handle to rinse and let it run for about a minute or two.
How does Pentair filter work?
How do I backwash my Pentair easy touch?
How often should I backwash my Pentair filter?
How do you backwash a push pull valve in pool?
How do you backwash a Pentair superflo pool pump?
Why am I having to backwash my pool so often?
Whenever the filter fills up with the dirt/debris it reduces the flow of water to your pool. Low flow = poor circulation which will lead to algae in the pool. Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear.
Where does the water go when you backwash a pool?
Backwash pools directly into the private sewer cleanout on your property instead of into the storm gutter. If you are on septic and don’t have sufficient area to discharge onto your property, try the following: Hire a contractor to pump the pool water into a truck to be hauled offsite.