Cable replacement
- Unfasten the two screws holding the front top cover in place, and remove it.
- Remove the water manifold and nozzle.
- Open the clip that holds the cable in place and remove the cable.
- Unfasten the cable from the motor unit by hand or using the designated tool, and unplug the cable.
Keeping this in view, how often should I run my Dolphin Pool Cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
Secondly, how do I reset my dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.
How do you test a dolphin power supply?
How do I test dolphin cable?
Can I use extension cord with dolphin pool cleaner?
Do not allow the power supply to be submerged in the pool. Can I use my Dolphin pool cleaner with an extension cord or surge protector? The Dolphin is not designed to be used with an extension cord. There are many different types of extension cords and we do not recommend using one.
How many hours per day should I run my Pool Cleaner?
The rule of thumb for pool maintenance is to run your pump for eight hours per day.
Can Dolphin power supply get wet?
The power supply is water resistant but not waterproof. Please cover the power supply if inclement weather approaches. Do not leave the power supply in standing water as this will damage the internal components.
Can I leave my robotic Pool Cleaner in the pool?
You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work. It’ll have to work harder to cover the same ground.
Can you use an extension cord with dolphin pool cleaner?
It should have a GFCI protected outlet within 20 feet of the pool. Do not use an extension cord.
Why is my dolphin pool cleaner not moving?
If you can identify an obstruction you can remove the object and then run your Dolphin again. If the Dolphin starts and continues to operate as per normal the the obstruction was the cause of the robotic pool cleaner not moving.
How do you disassemble a dolphin pool cleaner?
How do you keep dolphin pool cleaner cord from tangling?
How do you troubleshoot a dolphin pool cleaner?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.