Verify that the vacuum hose is firmly inserted into the inlet port at the skimmer; then inspect the hose for cracks or holes. The skimmer filter is dirty. Pull out the filter basket and check for debris that may be interfering with water flow to the pool pump. Air is getting into the pump through the pump cover.
Also question is, how do I make my pool cleaner move?
Thereof, why is my automatic pool vacuum not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
Why does my pool vacuum stay in one place?
The stronger the water flow, the more likely it is to get stuck in one place. You need some suction though or the pool won’t get cleaned properly. The easiest solution is a flow keeper valve. A flowkeeper valve is a valve that regulates the flow of water through the hose going to the cleaner.
How do you increase skimmer suction?
Check the Valve
The first thing to do to increase the suction is to check for blockage and air leaks. If one of the skimmers does not suck, it would be necessary to remove the basket from the skimmer. Then check if there isn’t a flow control valve at the bottom of the skimmer, which would be almost closed.
Why my pool skimmer has no suction?
The sand in your filter may be old and calcified. Replace your sand. There could be a blockage between your skimmer basket and the pool pump. There could be an obstruction in your pool pump impeller.