How do I know when my dolphin pool cleaner is finished?

by

SHUT DOWN – After about 3 hours of operation, the Cleaner will shut down automatically as indicated by the 4 LEDs turning off. The Cleaner can remain in the pool until you are ready to pull it out. Many people run the cleaner at night and take it out in the morning.

>> Click to read more <<

Additionally, how often should you run Dolphin?

If you have a lot of swimming in your pool, you can use the robotic pool cleaner every other day or once a day. If you don’t swim a lot, you should only run the pool once every two weeks.

Also question is, why is my automatic pool vacuum not moving? If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.

Secondly, can you leave the Dolphin cleaner in the pool?

Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.

Why is my dolphin pool cleaner not moving?

If you can identify an obstruction you can remove the object and then run your Dolphin again. If the Dolphin starts and continues to operate as per normal the the obstruction was the cause of the robotic pool cleaner not moving.

5 Related Question Answers Found

Can I use an extension cord with my Dolphin pool cleaner?

Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.

Why can’t you use an extension cord with a Dolphin pool cleaner?

Do not use an extension cord. In a wet deck environment the risk of stray voltage while small is signicant.

How long is a Dolphin vacuum cycle?

Each cleaning cycle is 2 hours. If it doesn’t finish cleaning in one cycle, you’ll have to manually restart it.

How do you troubleshoot a Dolphin pool cleaner?

Troubleshooting

  1. Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
  2. Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
  3. Turn the power supply off. …
  4. Unplug the power supply.

How long is a cycle for a Maytronics dolphin?

Product Specifications

S 300
Ideal pool length Up to 12 m
Cleaning coverage Floor, Walls & Waterline
Brushing Brush + Active Scrubber
Cleaning cycle time 1 or 2 hours

Leave a Comment