How to Prime a Pool Pump
- Turn the Multiport Valve to Recirculate. This will direct the water into the filter head, and then right back out to the pool.
- Remove Pool Plugs. …
- Fill The Pump With Water. …
- Turn the Pump On.
Besides, how do I open my Hayward pump?
How to Operate a Hayward Pool Pump
- Ensure the hoses are securely attached. …
- Check the skimmer water level. …
- Add water to the pump basket. …
- Open the air valve. …
- Confirm that the necessary cleaning agent is in the filter. …
- Monitor the filter’s pressure gauge and water return flow.
- Run the filter on the default “Filter” setting and check the filter’s pressure gauge. For a standard size pool a pressure above 10 PSI indicates pressure build up in the system.
- Run the filter and open the air relief valve on top of the filter. …
- Close the air relief valve.
Similarly, how do I prime my Hayward pool?
Steps to Prime Your Pool Pump
- Turn off the pump. …
- Switch to recirculate. …
- Release air. …
- Clean out the pump basket. …
- Fill the pump basket. …
- Once the pump basket is filled and tightened, make sure the air release valve is open and turn the power to the pump on.
- Check the water flow to your pump.
How much water do you need to prime a pool pump?
How do I prime my inground pool?
How do you prime a pump?
How To Prime Your Water Pump
- Make sure the power is turned off. Never leave a pump plugged in while you’re working on it. …
- Gain access to the pump system. …
- Check for damage. …
- Test a hose. …
- Open the relief valves. …
- Attach the hose. …
- Turn on the water and wait for it to enter the tank. …
- Turn the power on.
Are Hayward pool pumps self priming?
Hayward in-ground pumps are self-priming centrifugal pumps. These pumps have a vacuum chamber, commonly known as a pump housing. The pump housing must be filled with water in order to create a vacuum, resulting in the pump drawing the water out of your pool or spa.
How do you get air out of a Hayward pool pump?
The trick to bleeding the pool lines of air is to start with all the line valves closed. With the pump running, very slowly open the valves to introduce air into the pump until the pump sucks out all the air.
How do you prime an above ground pool pump?
If your water level is low, turn your above ground pool pump off and add more water to the pool. Once the water is high enough you can turn your pump back on and it should start to prime.
Why is my Hayward pool pump not priming?
Check the pump lid and pump lid o-ring and make sure they do not have any cracks from age. Lubricate the pump lid o-ring and ensure it is clean. Make sure there are no cracks, chips, or breaks in the pump basket.
What happens if air gets in pool pump?
If the pool pump is sucking air, then it may lose its priming. The pool pump can also overheat or cavitate. This is more common with in-ground pools. The function of a pool pump in in-ground pools is to pull water and distribute it through pool equipment into the pool.