How do I program my Intelliflo 2 VST pump?

>> Click to read more <<

Keeping this in view, how do I program my Pentair VST?

Also, how do I program my Pentair Intelliflo VSF?

Simply so, what RPM should I run my pool at?

The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.

How long should I run my Pentair IntelliFlo pump?

How do I reset my Pentair Intelliflo VSF pump?

How do you turn off Pentair Egg Timer?

If you desire a different method of operation, programs 3 and 4 can be changed to Manual mode in the control menu. To operate in Egg Timer mode, press a program button and then press Start/Stop. The pump will run that setting for the set amount of time and then turn off.

What is the best speed to run a pool pump?

If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.

How do you set an Egg Timer?

How do I program my Pentair IntelliFlo pool pump?

What is the benefit of a 2 speed pool pump?

Two-speed pool pumps are more energy-efficient than a single-speed pump, and work best on pools with water features. They run at two fixed speeds, high and low, and require a separate device such as an automation system to adjust between the two speeds.

How do you manually start a Pentair pool pump?

To operate in Manual mode, press one of the four speed buttons and then press the Start/Stop button. The pump will run the assigned speed for that speed button.

What is thermal mode on pool pump?

This feature allows you to set a speed (450- 3450 RPM) or flow (20-140 GPM) that runs when the IntelliFlo® VSF Variable Speed and Flow Pump goes into Thermal Mode. The temperature level that you wish Thermal Mode to start can also be set. IMPORTANT: This feature is for protection of the pump.

How do you set a Pentair pool pump to run continuously?

How do you control a 2 speed pool pump?

What is the difference between a 2 speed and variable speed pool pump?

Variable speed pumps don’t save energy

Single and two-speed pumps use traditional induction motors. These are just about the least efficient motors you can use, but they are cheap, so they are popular. Quality variable speed pumps use permanent magnet brushless motors.

How do you program Pentair Intelliflo variable speed pump?

How do I reset my Pentair IntelliFlo pump?

To reset the pump to the factory default settings:

  1. Ensure that the pump is powered on and the green power LED is on.
  2. Press the Stop button to stop the pump.
  3. Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.

How do I set the run time on my Intelliflo pump?

How to Set the Date/Time on the Pentair Intelliflo

  1. From the home screen, press the “Menu” button.
  2. Use the Up or Down Arrows to cycle to “Settings”
  3. Press “Select”
  4. Cycle to “Date/Time”
  5. Press Select.
  6. You will see the factory default Date, press “Select” again to edit.

How do I reset my Pentair Intelliflo variable speed pump?

To reset the pump to the factory default settings:

  1. Ensure that the pump is powered on and the green power LED is on.
  2. Press the Stop button to stop the pump.
  3. Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.

How do you adjust a variable speed pool pump?

Which is better Pentair vs Hayward?

The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

How long should I run my Pentair variable speed pump?

However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.

How do I set the schedule on my IntelliFlo pump?

How do you prime a Pentair IntelliFlo pump?

How To Prime Your Pentair Pool Pump

  1. Turn off power to pump (switch and breaker)
  2. Using black 3 way valve, turn off Skimmer (main drain on only)
  3. Remove pump lid.
  4. Fill pump with water all the way to top.
  5. Put pump lid back on.
  6. Turn on Pump.

How do I reset my Pentair Intelliflo VSF?

Are 2 speed pool pumps worth it?

At River Pools, we used two speed pumps for years with great success. They are quite a bit more expensive to purchase than single speed pumps and last the same amount of time, which is typically 3-8 years. On average, a two-speed pump will save about 50%-70% on energy cost compared to a one-speed pump.

What RPM should my pool pump run at?

Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.

How do you run a Pentair pool pump for 24 hours?

How do you unlock Pentair Intelliflo?

Make sure the pump has power, green LED is on. Make sure the pump is not running. Press and hold all of the four Speed buttons simultaneously for four (or more) seconds. Power off the pump, wait a few seconds, power it back on.

What is Egg Timer on pool pump?

The Egg Timer count down feature allows you to define the run time for different circuits. For example, whenever. you manually switch your spa on, you would like it to automatically turn off in two hours.

How many hours should a pool pump run per day?

approximately 8 hours

How do I set the time on a Pentair Screenlogic?

How do you run a variable speed pool pump?

How long do Pentair pool pumps last?

eight to 12 years

Leave a Comment