How do I remove a Dolphin Pool Cleaner from my pool?

by

The easiest and most fun way to get the robot out of the water:

  1. Log into the MyDolphin™ Plus app and click “Pick-up mode”.
  2. The robot will reach the wall closest to it, and will rise, and will wait for 3 minutes above the water surface.
  3. Grab the robot by the handle and pull it out the water.

>> Click to read more <<

Secondly, can you leave robotic cleaner in pool?

The power supply for most robot pool cleaners is water-resistant, but that’s not enough to protect itif the rain is bucketing down outside. Leaving the power supply in standing water could damage it. It’s best to store the machine and its power supply in a covered location when not in use.

Similarly, can I leave my Pool Cleaner in the pool? Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.

Accordingly, how do I remove Pool Cleaner from my pool?

How do I remove Dolphin filter?

Cleaning after use – removing and cleaning the filter basket

  1. Open the filter cover.
  2. The handle will lift up independently. Lift up the basket.
  3. Open the latch to release the bottom lid.
  4. The debris can then be removed.
  5. Clean the filter basket with a hose.

7 Related Question Answers Found

How do you remove a pool hose?

Well-known member. Large pair of slip joint pliers will do the trick. Just clamp around the hose and twist it a bit back and forth to loosen.

Why does my dolphin keep getting stuck?

My Dolphin Won’t Climb Walls / Gets Stuck

Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.

How often should you run a pool cleaner?

If it’s winter, and you’ve left the pool cover on the whole time, you can run the cleaner once a month for good measure. If it’s summer, and you’re using the pool a few hours a day, but covering it the rest of the time, you should run the cleaner at least twice a week.

How do you remove a vacuum plate from a pool?

To remove SKIM-VAC, merely grasp the hose connection (near the plate) and give a sideward twist or briefly lift vacuum head from pool. This will “break” the suction and allow easy removal. NOTE: Take care not to damage or scuff-up SKIM-VAC’s specially designed sealing surface.

Can you leave your Dolphin cleaner in the pool?

Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.

How do you remove a skimmer vacuum plate?

How long does the dolphin pool cleaner run?

Let the Dolphin Nautilus CC Plus robotic vacuum cleaner take over your pool cleaning duties for good. Easy to use and ideal for in-ground swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just

Brand DOLPHIN
Style Nautilus CC Plus
Color Blue/Black

Leave a Comment