Turn the power supply OFF. Wait 30 seconds, then turn it back on. Pool Cleaner does not move / Red light on the power supply.
One may also ask, how do you test a Dolphin power supply?
In this manner, how do you troubleshoot a Maytronics Dolphin?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Why is my robotic pool cleaner not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
Why is my pool vacuum losing suction?
Verify that the vacuum hose is firmly inserted into the inlet port at the skimmer; then inspect the hose for cracks or holes. The skimmer filter is dirty. Pull out the filter basket and check for debris that may be interfering with water flow to the pool pump. Air is getting into the pump through the pump cover.
How do I get my pool vacuum to work?
How do I know when my dolphin pool cleaner is finished?
SHUT DOWN – After about 3 hours of operation, the Cleaner will shut down automatically as indicated by the 4 LEDs turning off. The Cleaner can remain in the pool until you are ready to pull it out. Many people run the cleaner at night and take it out in the morning.
How do you test a dolphin pool cleaner?
Insert the two meter probes into the socket of the Amphenol Plug. The meter should read close to 29V DC. If you see 29V DC, the Amphenolotor Plug is good and you can go to Test 5A to check the Dolphin Motor.
What to do when pool vacuum stops working?
If your pool cleaner is moving around the pool normally but is not picking up debris, the normal solution is to clear the clog in the suction throat, or empty the debris bag or basket. Suction cleaners also need a clean pool filter to both move and vacuum well.
Why does my pool cleaner stopped working?
Most likely, the key reason is a congested pool filter or skimmer basket, or a clog at the mouth of your pool cleaner. If you own a particularly powerful pool pump or your water-flow is really strong, your cleaner will probably move faster than normal.
Why does pool cleaner get stuck?
Where is the impeller on my Dolphin pool cleaner?
How do I fix the suction on my pool vacuum?
Verify that the vacuum hose is firmly inserted into the inlet port at the skimmer; then inspect the hose for cracks or holes. The skimmer filter is dirty. Pull out the filter basket and check for debris that may be interfering with water flow to the pool pump. Air is getting into the pump through the pump cover.
Can you use an extension cord with dolphin pool cleaner?
Amazon.com: Customer Questions & Answers. Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
Can you leave the Dolphin cleaner in the pool overnight?
While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
Why is my pool cleaner not working?
Most likely, the key reason is a congested pool filter or skimmer basket, or a clog at the mouth of your pool cleaner. If you own a particularly powerful pool pump or your water-flow is really strong, your cleaner will probably move faster than normal.
How long do robotic pool cleaners last?
Generally, you can expect at least 5 years‘ service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for. If you keep your robotic pool cleaner in good condition, there is no reason it shouldn’t last much longer.
How do I get my dolphin pool cleaner to work?
The Maytronics Dolphin Nautilus Robotic Cleaner is self-contained and fully automatic. Just drop it in your pool, turn it on and leave it for about 3 hours.
Why does the creepy stop working?
The filter sand gets clogged
The most common cause for a Kreepy to stop working is clogged filter sand. This is easy to diagnose because whenever you backwash the pool filter, you’ll find that the Kreepy works like a bomb for 10 minutes. Then it gets sluggish and slows down or stops again.
How do I turn on my Maytronics pool cleaner?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
Why is my aqua Critter not moving?
If your Pool Cleaner is not moving or is barely crawling it may be clogged with debris. This guide describes how to clear the the debris and check the operation of the Main Turbine that propels the pool cleaner.
Why won’t my dolphin pool cleaner climb walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
Why does my Zodiac pool cleaner keeps stopping?
If your Zodiac pool cleaner stops and starts, the first thing you might want to do is check the suction flow coming through the hose. You will need your pump on for this operation. Included with this Zodiac pool cleaner is a pool pulse, and it has numbers on it.
How often should I run my dolphin pool cleaner?
I have owned a Dolphin Nautilus for about 4 years now. It cleans like a champ. My usual routine is to wait until the bottom of the pool is noticeably dirty before I run the robot. Generally, this may be once a week if the wind is not blowing too many leaves into the pool, twice a week if it is.
How long is Maytronics warranty?
The Best Warranty in the Industry
Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years.
Why my pool vacuum has no suction?
Why is the pool cleaner not working?
Most likely, the key reason is a congested pool filter or skimmer basket, or a clog at the mouth of your pool cleaner. If you own a particularly powerful pool pump or your water-flow is really strong, your cleaner will probably move faster than normal.
How do I increase the suction on my pool vacuum?
Can you leave the Dolphin cleaner in the pool?
This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.