How do I reset my Intelliflo VSF?

by

>> Click to read more <<

Consequently, is there a reset button on Pentair pool pump?

Keeping this in consideration, how do I reset my Pentair Intelliflo pump password? Make sure the pump has power, green LED is on. Make sure the pump is not running. Press and hold all of the four Speed buttons simultaneously for four (or more) seconds. Power off the pump, wait a few seconds, power it back on.

Likewise, what do you do when the power goes out and your pool freezes?

How do I reset my Pentair password?

7 Related Question Answers Found

Why is my water pump not working after power outage?

Often when there is no water after a power outage it is due to the low-pressure switch. This is because the tank has to have a certain amount of pressure to keep the water levels where they need to be. When there is no power, the pressure drops and causes the pressure to drop. This then causes the water levels to drop.

How do I reset my Pentair Intelliflo pump after a power outage?

How to “restart” your pool once power is restored

  1. Remove the pool cover and check for debris. …
  2. Close any drain plugs or valves you may have opened during the power outage.
  3. Turn the breakers back on and prime the pool pump by adding water to the pot, replace the lid and turn the pool pump on.

Why does my IntelliFlo pump keep shutting off?

It could be a bad drive, over voltage, under voltage, drive over heating, ect. You could eliminate it being a control problem by unplugging the control cable on the motor, and manually running it. If it does not do it anymore then it is a control issue.

How do I reset my pool pump?

Steps to Prime Your Pool Pump

  1. Turn off the pump. …
  2. Switch to recirculate. …
  3. Release air. …
  4. Clean out the pump basket. …
  5. Fill the pump basket. …
  6. Once the pump basket is filled and tightened, make sure the air release valve is open and turn the power to the pump on.
  7. Check the water flow to your pump.

How do you unlock Pentair pool pump?

TO UNLOCK THE PUMP:

Press and hold the “1” and Quick Clean buttons for atleast 3 seconds. “Enter Loc Code” will scroll across the screen. 2. Use the “1”, “2”, “3” and Quick Clean buttons to enter your four-digit keypad lockout code.

How do I program my Pentair IntelliFlo pool pump?

How do I reset my Pentair pool pump timer?

How to Set the Date/Time on the Pentair Intelliflo

  1. From the home screen, press the “Menu” button.
  2. Use the Up or Down Arrows to cycle to “Settings”
  3. Press “Select”
  4. Cycle to “Date/Time”
  5. Press Select.
  6. You will see the factory default Date, press “Select” again to edit.

Leave a Comment