To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.
Moreover, why does my Intelliflo pump keep shutting off?
It could be a bad drive, over voltage, under voltage, drive over heating, ect. You could eliminate it being a control problem by unplugging the control cable on the motor, and manually running it. If it does not do it anymore then it is a control issue.
Similarly one may ask, how do you manually turn on a Pentair pool pump?
How do you manually turn on a pool pump?
How do I reset my Pentair easy touch?
How does Pentair freeze protection work?
The system detects all devices that have Freeze Protection ON, and activates the device to stop the pipes from freezing. If freeze protec- tion is only applied to one body of water. Note: If the pool or spa is running a schedule or operated manually, this will override freeze protection.
How do I manually start my Pentair pool pump?
To operate in Manual mode, press one of the four speed buttons and then press the Start/Stop button. The pump will run the assigned speed for that speed button. Speeds 1-4 can be programmed to run at a certain speed and for a duration of time once a speed button is pressed. Speeds 3 and 4 are Egg Timers by default.
How do I turn on my pool pump Pentair Easytouch?
How do you reset pool pump after power outage?
How to “restart” your pool once power is restored
- Remove the pool cover and check for debris. …
- Close any drain plugs or valves you may have opened during the power outage.
- Turn the breakers back on and prime the pool pump by adding water to the pot, replace the lid and turn the pool pump on.
Why does my Pentair pump keep stopping?
There are several reasons why your pump may randomly shut off—a behavior known as “pump tripping.” Most commonly, your pump may be operating at the wrong voltage, overheating, or simply failing to compete with your neighborhood’s electrical needs.
Why won’t my pool pump come on?
When a pump doesn’t turn on or starts shutting off quickly after it’s started, it’s usually an electrical problem, which could mean loose connections, a bad capacitor or overloaded voltage. But it could also be a jammed motor.
How do I reset the schedule on my Pentair Intelliflo pump?
How do I reset my pool?
How do you unlock Pentair pool pump?
TO UNLOCK THE PUMP:
Press and hold the “1” and Quick Clean buttons for atleast 3 seconds. “Enter Loc Code” will scroll across the screen. 2. Use the “1”, “2”, “3” and Quick Clean buttons to enter your four-digit keypad lockout code.
How do I turn on my Pentair pool pump?
How do I turn on my Pentair pump?
How do I manually turn my pool pump on?
How do you set the Pentair pool pump timer?
How do I reset my Pentair pool timer?
How to Set the Date/Time on the Pentair Intelliflo
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to cycle to “Settings”
- Press “Select”
- Cycle to “Date/Time”
- Press Select.
- You will see the factory default Date, press “Select” again to edit.
How do I turn on my Pentair spa pump?
Tap the Home screen Spa icon to display the Spa Pump control settings screen. From this screen tap the Spa Pump button to activate the Spa heat source. A Blue badge displayed on the Spa icon indicates the Pool/Spa pump button has been manually turned on. The Blue badge displays until the pump button is turned off.
How do you turn off Pentair egg timer?
If you desire a different method of operation, programs 3 and 4 can be changed to Manual mode in the control menu. To operate in Egg Timer mode, press a program button and then press Start/Stop. The pump will run that setting for the set amount of time and then turn off.