People also ask, how do I set the time on my Pentair easy touch?
Similarly one may ask, how do I reset my Pentair IntelliFlo VSF?
To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.
Can I run my pool pump every other day?
Run the pump for 8 hours, every 24 hours. You can also pause in between; there is no need to run it continuously. Ideally, after you shock the pool, be sure to run the pump at night and during non-peak hours, to save on your energy bills.
How many hours should I run my variable speed pool pump?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.
How do I reset the schedule on my Pentair Intelliflo pump?
Is it better to run pool pump at night?
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
What speed should my Pentair pool pump run at?
Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.
Should pool pump run all the time?
Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
How do I program my Pentair 342001?
How do you program a pool pump timer?
What is quick clean on pool pump?
The pump is equipped with a Quick Clean feature, which can be engaged to temporarily run at higher or lower speeds ranging from 300 to 3450 RPM. At the end of a Quick Clean cycle, the pump will automatically return to the appropriate point in its programmed schedule.
How do I reset my Pentair IntelliFlo pump password?
Make sure the pump has power, green LED is on. Make sure the pump is not running. Press and hold all of the four Speed buttons simultaneously for four (or more) seconds. Power off the pump, wait a few seconds, power it back on.
How do I reset my Pentair Intelliflo pump after a power outage?
Close any drain plugs or valves you may have opened during the power outage. Turn the breakers back on and prime the pool pump by adding water to the pot, replace the lid and turn the pool pump on. Ensure your pool pump and filter are working, and then let them run for one hour to begin decontamination.
How long should I run my Pentair variable speed pump?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.
How many rpms should I run my pool pump?
Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.
How do you program a sta rite variable speed pool pump?
On the pump panel near the Sta-Rite logo in the bottom left hand corner you’ll see a “start/stop” button. Make sure its in “stop”, or off mode.
- Hold down display until you see “12hr” flashing.
- Select 12 or 24 hour using the up and down arrows. …
- Hit display to save and move onto the time setting.
How do I set the timer on my Pentair superflo V?
How does Pentair freeze protection work?
The system detects all devices that have Freeze Protection ON, and activates the device to stop the pipes from freezing. If freeze protec- tion is only applied to one body of water. Note: If the pool or spa is running a schedule or operated manually, this will override freeze protection.
How do you set a Pentair variable speed pump?
How do I reset my Pentair pool pump?
How do I program my Intelliflo VSF pump?
Is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
How do you program a variable speed pump?
How long does a pool pump need to run each day?
How do I set schedule on Pentair superflo V?
How long should I run my Pentair Intelliflo pump?
How do you program a Pentair?
What are the best hours to run your pool pump?
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
How do I set the time on my Intelliflo pump?
How to Set the Date/Time on the Pentair Intelliflo
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to cycle to “Settings”
- Press “Select”
- Cycle to “Date/Time”
- Press Select.
- You will see the factory default Date, press “Select” again to edit.
How do I program a Pentair Intelliflo 2 VST?
Should I run my pool pump on high or low?
No matter what size pump you are using, running it at lower speeds saves energy – and money. For example, you could run your variable or two speed pump twice as long as you normally would on its higher speeds and still save money.
How do I change the time on my Sta Rite pump?
What speed should I set my pool pump to?
How many hours should I run my pool pump in the winter?
What is Egg Timer on Pentair?
The Egg Timer count down feature allows you to define the run time for different circuits. For example, whenever. you manually switch your spa on, you would like it to automatically turn off in two hours. Use the Egg Timer circuit. to set an automatic shut-off time.
How do you program a Pentair superflo pump?
How do you schedule a Pentair Intelliflo pump?
How many RPMs should I run my pool pump at?
For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs. If after a few days your pool starts to look cloudy or hazy, you can set the pump to run at 2000 RPMs.
How do I program my Pentair IntelliFlo VSF?
How often should you run pool pump?
Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.
What RPM should I run my Pentair pool pump?
Generally, I run my equipment at 1700 RPMs for 10 hours. I run this with the saltwater generator set at 50% for 10 hours. In my case, 1700 RPM’s is the minimum I can do to reliably activate the saltwater generator and filter the pool.
What is thermal mode on pool pump?
This feature allows you to set a speed (450- 3450 RPM) or flow (20-140 GPM) that runs when the IntelliFlo® VSF Variable Speed and Flow Pump goes into Thermal Mode. The temperature level that you wish Thermal Mode to start can also be set. IMPORTANT: This feature is for protection of the pump.
What should my pool pump be set on?
The lever should be on the ‘Filter’ setting most of the time. This is the setting that provides normal pool filtration by pushing the water through the filter media (sand, glass beads or D.E) that then traps any dirt and debris before the water is returned to the pool.
How do you unlock Pentair pool pump?
TO UNLOCK THE PUMP:
Press and hold the “1” and Quick Clean buttons for atleast 3 seconds. “Enter Loc Code” will scroll across the screen.
How do I reset my Pentair IntelliFlo?
How do I reset my Pentair easy touch?
How do I set the run time on my Intelliflo pump?
How to Set the Date/Time on the Pentair Intelliflo
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to cycle to “Settings”
- Press “Select”
- Cycle to “Date/Time”
- Press Select.
- You will see the factory default Date, press “Select” again to edit.
How do you set the run time on a Pentair variable speed pump?
How do I program a Pentair?
How do you run a Pentair pool pump for 24 hours?
How do you manually turn on a Pentair pool pump?
How do you program a pool pump?
How do you adjust a variable speed pool pump?
How do you program a pool timer?
How do I run my pool pump 24 hours?
How do I set the timer on my Pentair Intelliflo variable speed pump?
How to Set the Date/Time on the Pentair Intelliflo
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to cycle to “Settings”
- Press “Select”
- Cycle to “Date/Time”
- Press Select.
- You will see the factory default Date, press “Select” again to edit.
How do I program my Pentair variable pump?
How do you use a Pentair pool pump?
How do I reset my Intelliflo pool pump?
1 Answer
- Make sure that the pump is on.
- Press the stop button – the pump will stop.
- Press and hold the four buttons simultaneously for about 4 seconds. Power off the unit and restart.
- The factory settings will be assigned.