How do I setup my dolphin pool cleaner?

by

Adjusting the handle angle

  1. Lay the handle down at an angle of 180º to the ground.
  2. Push the base of the arm into the body of the robot pool cleaner and slide it towards the rear of the robot pool cleaner until it clicks into the required position.

>> Click to read more <<

Then, how do you put Dolphin in pool?

Moreover, can I leave my dolphin pool cleaner in the pool overnight? While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.

Furthermore, where do you store Dolphin Pool Cleaner?

STORE CLEANER – Store the Pool Cleaner in an area that is out of the direct sun and where the temperature stays above 41 degrees. If you don’t have a Caddy, place the Cleaner on its side so that its weight does not flatten the brushes.

How do I reset my dolphin power supply?

Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.

2 Related Question Answers Found

How do you use Dolphin pool cleaner?

How To Operate a Maytronics Dolphin Nautilus Robotic Cleaner

  1. STRAIGHTEN POWER CORD – The blue Power Cord is stored coiled. …
  2. CONNECT TO POWER SUPPLY – Connect the power cord to the power supply by removing the cap and then pushing and twisting the cord plug onto the power supply receptacle.

How long is a Dolphin Pool Cleaner cycle?

Each cleaning cycle is 2 hours. If it doesn’t finish cleaning in one cycle, you’ll have to manually restart it. All of that is done with a few buttons on the power supply. Like other cleaning robots with smart navigation, it will take a few cycles for it to map out the most efficient path for your pool.

Leave a Comment