Furthermore, how do I turn off my Hayward pool light?
CENTER KNOB – To turn the lights on, briefly push on the CENTER KNOB. To turn the lights off, push in and hold for 3 seconds. To change a show or color, rotate the CENTER KNOB to the desired show/color and push the CENTER KNOB briefly to save.
- Step 1: Safety First! Turn Off the Power. …
- Step 2: Remove the Top Screw from the Light. …
- Step 3: Pry the Light Fixture Out. …
- Step 4: Test the Wiring. …
- Step 5: Take the Fixture Apart. …
- Step 6: Remove the Old Light Bulb. …
- Step 7: Screw in the New Light Bulb. …
- Step 8: Test the Light.
Keeping this in consideration, can you replace the bulb in a Hayward ColorLogic pool light?
ColorLogic® 120V LED Replacement Bulbs are a quick, cost-effective way to upgrade standard incandescent pool lights to vibrant, color-rich, energy-efficient LEDs. Installation does not require rewiring or fixture replacements.
How do I control my pool lights?
How do you reset the LED light on a Hayward pool?
To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on. When the lights come back on, they should enter program #1, and be synchronized. Refer to the included color card as a quick reference to the available programs.
Where is my pool light breaker?
A GFCI for a pool light circuit is generally located on the controller box for the equipment. The GFCI outlet itself also works as an electrical outlet to supply most tools and/or appliances. Sometimes, on older sets, it can be located just under the light switch itself, usually by the back door.
How long do Hayward Colorlogic Lights last?
How do you change a bulb in a Hayward Pool?
What is the warranty on a Hayward Salt Cell?
Includes a 15 ft. cord. 3 year warranty when sold from a Totally Hayward® professional. Expert Line® products are only available through your local pool professional.