On the pool control local display/keypad, press the “Menu” button (possibly multiple times) until “Set- tings Menu” is displayed. b. Press “<“ or “>” (again, possibly multiple times) until “Teach Wireless” is displayed.
In this manner, how do you use a remote pool?
Additionally, how do I program my Hayward Pro Logic?
How do I unlock my Hayward Pool remote?
Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) keys until the text on the display changes from ‘Locked’ to ‘Unlocked’. Press the (<) one time, ‘Reset Config. to Default’ should appear on the display.
How do I program my Aqua Pod remote?
Press and hold any button on the Aqua Pod remote for 4 seconds. The Pro Logic/Aqua Logic display should say “Teach Wireless: Successful”. 4. Installation is complete: you can now use the Aqua Pod remote.
How do you unlock the configuration menu on Goldline Controls?
How do you turn on a Hayward spa?
How does Hayward freeze protection work?
Freeze Protection: This function protects the pool, plumbing, and equipment against freeze damage. If Freeze Protection is enabled and the AIR temperature falls below the preset freeze protection temperature (see Filter Configuration), the Pro Logic will turn on the filter pump to circulate the water.
What is service mode on pool?
Service Mode: Service and Timer mode is used for pool/spa maintenance or service purposes to manually control and test system equipment. During Service mode, the Home screen, Indoor Control Panel and Wireless remote displays will show SERVICE MODE.
How do I control my Hayward pool heater remotely?
The heater can be remotely controlled using the firemans switch. That is the way pool automation controls heaters. It is just a 2 wire low voltage line that when connected the heater fires and when open the heater is off. You can run the firemans switch line into your house and control it by any SPST switch.