How do I unlock my Hayward pump?

by

Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked’ (unit will beep).

>> Click to read more <<

Beside this, how do you change the voltage on a Hayward Super pump?

Moreover, how does Hayward freeze protection work? Freeze Protection: This function protects the pool, plumbing, and equipment against freeze damage. If Freeze Protection is enabled and the AIR temperature falls below the preset freeze protection temperature (see Filter Configuration), the Pro Logic will turn on the filter pump to circulate the water.

Also, why is my Hayward pool pump not turning on?

If the pump won’t start or run, check these things

If the motor does not turn on, check the breaker and timeclock switches. If the motor makes no noise at all, check the wiring and terminal connections. If the motor won’t come up to full speed, check the incoming voltage with a multi-meter.

How do you unlock the configuration Menu on Goldline Controls?

5 Related Question Answers Found

How do you unlock the configuration Menu on a Hayward pump?

How do you reset an aqualogic salt cell?

Reset AquaRite Salt Chlorination Inspect Cell Light

If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.

How do you backwash a Hayward Super pump?

How do I manually turn my pool pump on?

How do I reset my Hayward pump?

Leave a Comment