In this way, how do I treat my pool for the first time?
At the very least, you should have the following chemicals on hand whenever we’re talking about treating pool water:
- Shock Chlorine Granules or pure liquid chlorine.
- Chlorine tablets or Stabilized chlorine (if not using a salt water chlorinator)
- pH Regulators (pH up and pH down)
- Cyanuric Acid.
- Calcium Up and Down.
Correspondingly, is liquid chlorine the same as shock?
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
Can I shock my pool with liquid chlorine?
Sodium hypochlorite (also known as liquid chlorine) is another frequently used option for shocking pool water. This is a common choice in pool shock because you can pour the solution directly into the pool without having to dissolve the chlorine in water beforehand.
Should I shock my pool when I first fill it up?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.
Is it hard to maintain an above ground pool?
Above ground pools are less expensive, easier-to-install alternatives to in-ground pools. And if that weren’t enough, they’re also usually easier to maintain. There are a few things you’ll want to do to keep your above ground pool in good working condition.
How often should you put chlorine in pool?
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
What chemicals do I need to add to a freshly filled pool?
Chemicals Needed for Pool Start Ups
- Stain & Scale Preventer.
- Granular Shock Chlorine.
- Chlorine Tablets.
- pH Increaser and/or pH Decreaser.
- Alkalinity and/or Calcium Increaser.
- Cyanuric Acid (Stabilizer)
- Algaecide and Clarifiers if needed.
- Complete Test Kit or Test Strips.
How much chlorine does a 3000 gallon pool need?
75 ounces per 3,000 gallons every week. Initially you will need stabilizer to protect the chlorine from the sun. This is added at a rate of one pound per 3,000 gallons of water.
Do I need to shock my new pool?
In general, you should shock your pool when: Algae begins to grow in your pool. The free chlorine level of your pool measures zero. The chloramines or combined chlorine level rises above 0.5 parts per million (ppm).
How much baking soda should I add to my 3000 gallon pool?
A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool’s pH tested below 7.2, add 3-4 pounds of baking soda. If you’re new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.