Subsequently, how do I update my aqualogic software?
The USB memory stick must be plugged into the side of the Local Display behind the Dead Front of the OmniLogic. Next, you will be able to upgrade your firmware by going to OmniLogic’s Configuration Menu. With the new firmware, the OmniLogic will automatically start up again.
Keeping this in view, how do you program a pool pump?
How do I unlock my Hayward configuration menu?
Unlock Configuration Menu To unlock the Configuration Menu, repeatedly press the Menu button until “Configuration Menu” is shown in the Menu Display. Press and hold the Menu Display for 5 seconds. Refer to your pool control’s manual to determine what options are offered within the Configuration Menu.
How do I set the schedule on my Intelliflo pump?
How do I reset Intelliflo pump?
To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.
How do you reset the timer on a Hayward pool pump?
SAVE TIME SETTINGS – You’ll see a screen that says “Use Timers Menu to set timelocks”, hit >. Then you’ll see a screen that says “Settings Changed”. Press + if you want to save or – if you want to erase everything you set. If you hit +, you’ll end up back at the home screen with the new time and date.