Cable replacement
- Unfasten the two screws holding the front top cover in place, and remove it.
- Remove the water manifold and nozzle.
- Open the clip that holds the cable in place and remove the cable.
- Unfasten the cable from the motor unit by hand or using the designated tool, and unplug the cable.
Herein, can I use extension cord with dolphin pool cleaner?
Do not allow the power supply to be submerged in the pool. Can I use my Dolphin pool cleaner with an extension cord or surge protector? The Dolphin is not designed to be used with an extension cord. There are many different types of extension cords and we do not recommend using one.
Just so, how do you test a dolphin power supply?
How do I keep my pool cleaner from tangling?
How often should I run my Dolphin pool cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
How do you keep dolphin pool cleaner cord from tangling?
Can I plug my Dolphin into an extension cord?
Dolphin does not recommend an extension cord.
How long is power cord for dolphin pool cleaner?
The blue cord that goes from the power box to the cleaner is about 60′ long, but the AC cord is only 7′ long.
How do I test dolphin cable?
Grip the cable firmly and pull it out of the socket. 4. Using a multimeter set to continuity, check the continuity of each wire. If continuity is good, replace the plug, it can only go in one way, and tighten the hold down nut.
Why can’t you use an extension cord with a dolphin pool cleaner?
Do not use an extension cord. In a wet deck environment the risk of stray voltage while small is signicant.
How do you disassemble a dolphin pool cleaner?
How many hours per day should I run my pool cleaner?
The rule of thumb for pool maintenance is to run your pump for eight hours per day.
How do I connect my dolphin pool cleaner to my phone?
Activate the Pool Cleaner Using your Mobile Smart Device
Sign up by creating an account or use your Gmail/Facebook accounts. Scan the QR code located on the side of the power supply. Alternatively, press “Search for your robot manually” to pair with your Pool Cleaner. The app will start pairing with your power supply.
Why does my Polaris get tangled?
Sometimes, the reason hoses and cables become tangled is because they’re stiff and not pliable enough to move freely as the cleaner works. You can use the power of the sun to help alleviate this. On a warm, sunny day, completely disconnect the float hose and power cable.
Why does my Dolphin pool cleaner do wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. When the water level is too high, the water line is very close to the coping. So when the cleaner starts to climb the wall, it hits the coping and flips on to its back.
Can I leave my Dolphin pool cleaner in the pool overnight?
While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
Why is my Dolphin Pool Cleaner doing wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. When the water level is too high, the water line is very close to the coping. So when the cleaner starts to climb the wall, it hits the coping and flips on to its back.
Can Dolphin power supply get wet?
The power supply is water resistant but not waterproof. Please cover the power supply if inclement weather approaches. Do not leave the power supply in standing water as this will damage the internal components.