Setting the Time:
- From the home screen, press the “Menu” button.
- Use the Up or Down Arrows to navigate to “Settings”
- Press “Select”
- Navigate to “Date/Time”
- Press Select.
- Use the Up or Down Arrows to navigate to the Time Settings, first we’ll do the Time Format.
Beside this, how do you calibrate a pool pump?
- Turn off power to pump (switch and breaker)
- Using black 3 way valve, turn off Skimmer (main drain on only)
- Remove pump lid.
- Fill pump with water all the way to top.
- Put pump lid back on.
- Turn on Pump.
Consequently, how do I reset my Pentair superflo?
What is egg timer on pool pump?
Use the Egg Timer circuit. to set an automatic shut-off time. The time period can be anywhere from 1 minute to 24 hours. The Egg Timer is. also a useful feature for turning off lighting and spa jets.
How do you set the schedule Pentair superflo variable speed pump?
How do I set my Pentair pump?
Adjusting and Saving a Pump Speed
1. While the pump is running, press the Up or Down arrow to adjust to desired speed setting. 2. Press and hold down a Speed button (1-4) for three (3) seconds to save speed to the button or press Save to save the speed.
How do I sync my Pentair Easy Touch remote?
New member
- press menu.
- press down button, scroll to settings.
- Press right button to select.
- Press up button, scroll to “Wireless Address”
- Press right button to select. …
- Now repeat steps 1-5 with the handheld wireless controller, “Address Found” will display.
How do I reset my Pentair easy touch?
Right button: Press the Right button to reset system. The main screen will be displayed and communication will be established with the optional EasyTouch Indoor Control Panel if installed.
How do you change the time on a Pentair superflo variable speed pump?
What should my pool pump be set on?
The lever should be on the ‘Filter’ setting most of the time. This is the setting that provides normal pool filtration by pushing the water through the filter media (sand, glass beads or D.E) that then traps any dirt and debris before the water is returned to the pool.
How do you set a schedule on Pentair?
The Schedule screen lists each scheduled circuit(s) start and stop time, and days to run. Add a Program: From Home screen tap Schedule > Add Schedule > Weekly to add a new schedule. Note: If the system is in Vacation Schedule mode, the Home screen Schedule icon will change to Vacation text.
How do I adjust my variable speed pool pump?
Best Setup For Variable Speed Pumps
The idea is to try and run your variable speed pump at the lowest RPMs as possible while still filtering your pool water properly. If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings.
How do I reset my Pentair pump?
To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.
How many rpms should my pool pump run at?
The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.
How many hours should I run my variable speed pool pump?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
Is there a reset button on a Pentair pool pump?
TO PERFORM A FACTORY RESET:
Press Start/Stop to stop the pump. 2. Record all of the custom schedule settings and the priming speed in Table 3. These settings can be found by pressing the “1”, “2”, “3”, and “Quick Clean” buttons and cycling through all the screens.