How do you take care of a vinyl pool?

Take care of your vinyl liner and keep your pool in top shape all summer long with these five tips:

Check your chemicals. Ensuring proper water balance in your pool is critical to maintaining your pool liner. …
Don’t drain your pool. …
Prevent unnecessary weathering and buildup. …
Keep your pool clean. …
Avoid sharp objects.

Secondly, what chemicals do you need for a vinyl pool?

Recommended Chemical Levels for LOOP-LOC Pool Liners:

pH (between 7.2 and 7.6)
Total Alkalinity (between 80 and 125 ppm)
Calcium Hardness (between 175 and 250 ppm minimum)
Free Chlorine Residual (between 1.0 and 1.5 ppm)
Cyanuric Acid (between 40 and 75 ppm)
Never mix chemicals together.

Hereof, can you use chlorine tablets in a vinyl pool? do not use chlorine floaters, in summer or winter, which may come to rest on the vinyl, or tip over and spill it’s contents. do not put tablets in the skimmer. If you use chlorine tablets, use a chlorine feeder, installed by your pool equipment.

Moreover, how do you shock a vinyl pool?

What can you put in a pool to ruin it?

Here are six common ways that pool owners damage their pools.

Tearing the Pool Liner. …
Not “Winterizing” the Pool or Spa Properly. …
Not Maintaining Proper Ph and Alkalinity. …
Not Brushing the Sides. …
Adding Shock Directly Into the Filter. …
Adding Shock Directly to the Water.

What do you use to clean a vinyl pool?

Combine one part chlorine bleach and one part water. Use a spray bottle or a small garden sprayer to apply the bleach cleaner to the liner. Let the cleaner dry on the liner so it can remove the stains. You can clean any spots on the liner while the pool is full by applying the cleaner above the water line.

Do I need calcium in a vinyl pool?

For vinyl pools, calcium should be between 150-250 ppm. A low level can result in foaming, which is unpleasant but shouldn’t harm the liner. If calcium hardness goes above 400 ppm, you will likely see a white, flaky crust on the liner and pool equipment.

Can I shock my pool with liquid bleach?

Calculate the amount of bleach you need based on the fact that 1 gallon will raise the free chlorine level of 30,000 gallons of water by 2 ppm. If you need to mildly shock a 30,000-gallon pool by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of bleach. To raise it to 10 ppm, you need 5 gallons.

How do I keep my vinyl pool liner from fading?

How To Prevent Fading On Your Vinyl Pool Liner

Use a swimming pool cover. …
Update your landscaping and design around the pool. …
Use natural cleaners. …
Balance the water chemistry. …
Use the recommended chemical levels. …
Don’t cover the pool after adding chemicals.
Avoid using chlorine floaters.